RCA console TV need to change to video mode without remote

I wonder if a HDMI cable would be in order then.

Go push menu button on the front of tv or the right side.Pick the video out,or tv.Or buy a remote.Website 1-800-Remotes factory Original.For the original remote.

no you require the remote or a universal remote or sometimes a cable remote that has been programmed to work the volume on the tv set will have an input button .

you should have a menu button on the
frount of the tv press it and then select
with the (ch up) (ch dn) to highlight the
input/sorce or ant select with the enter
button then (ch up ) ( ch dn) highlight
video 1 or 2 press enter .

If this was not helpful tell me the
model # and look it up on my data base.


Rob

You may be able to press the channel down button, past channel 1 to the av inputs.
It works on some tvs, but not all.

During a recent move the remote was lost. I have the 6420FF in my son's room and trying to set up dvd and wi console set up, but cannot adjust tv via menu button on tv. Is there any way to set-up game system and/or dvd without remote?

try opening it up and clean the remote with alcohol and soft cloth.let it dry.while drying, check the rubber buttons for breakage.then assemble.be sure your batteries are ok.

After market remotes only work the most basic of functions - ie., volume channel changes , on/off. They do not get into menus, change inputs, etc. If you can change channels on the console tune it to 3 or 4 and get an rf adapter for your dvd player outputs, set it to one of those channels, and connect to tv antenna input. Ir will work but the picture will not be as good as it can be.

the answer to your ques is. go buy a universal remote control. since your tv is made by thomson electric. (ge@rca)you can prob get a rca universal remote at wallmart or walgreens. you won't need to reprogram. it everytime you change baterys. after you get set to turn on and off just hit tv/vcr button on remote or select channel 91 or 92 (on some models that is your video for rca/ge) good luck doctordave

All you need is to press the input select button on the remote to change between the tv and the video inputs.