Protection Error every 5 minutes the system goes into sleep mode...and just before shutting down it flashes "Protection Error" ....The sleep mode is not going OFF

This might be saying you need to wait 24 hours before it runs:

7. Stand-by/power saving mode: • When the cycle ends, the green "SLEEP" indicator on the control panel lights up and the LED display flashes "93". The system is now in Stand-By mode. After a while, it shuts down and sets itself in a Power Saving mode. The system will automatically turn itself back on in 24 hours, starting its daily cycle of chlorine production. • The "SLEEP" indicator stays on, while the system is in the Power Saving mode. The LED display however, goes blank after 5 minutes. Press any button ( or ) to view the last LED code.

From the manual:

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwinsvC4norqAhWNUt8KHSLlA3QQFjAUegQIBxAB&url=https%3A%2F%2Fintexwetset.co.uk%2Fwp-content%2Fuploads%2Fsites%2F2%2F2019%2F04%2F26668-26670-ECO5220-6220-ECO5230-6230-1.pdf&usg=AOvVaw2zbAebQw6eyqj-dBf6lIdF

Sleep mode on a Windows 7 PC saves power without you having to turn your computer off and without losing any work. This option cuts the power to your monitor, powers down the hard drive and pauses all functions until you awaken the computer from hibernation. Whether you have a laptop, desktop or workstation, putting your computer into sleep mode will lower your electric bill and save money! Click the "Start" button in the lower left corner of your desktop. In the lower right corner of the Start menu, next to the "Shut Down" button, is a button labeled with a small, right-pointing arrow. Mouse over the arrow. The Shut Down menu appears. Point at "Sleep" and click on this option. Your Windows 7 computer goes into sleep mode. Wake your computer from sleep mode by jiggling the mouse. There may be a delay of a few seconds before your hardware powers on. All of your open programs are still open and your work is intact, just as you left it before the computer entered sleep mode. Configure your Windows 7 PC to go into sleep mode automatically when it is not used for a certain amount of time. Click "Start" and select "Control Panel." Click "System and Security." Click "Power Options." A menu opens. Click on "Choose when the computer sleeps" and select the number of minutes of inactivity. You can also set a separate time interval to put your monitor into sleep mode. If you set both to 10 minutes, then your PC and monitor will automatically go into sleep mode after 10 minutes of inactivity Your Computer in sleep mode b> First, save all of your work. Information in computer memory is not saved while your computer is on standby. From the Start menu, select Settings, then Control Panel, then Power Management. Click Standby Beside When I Push the Power Button. Push the Power button. b> Automatically Putting Your Computer on Standby b> Save all work before leaving your computer. From the Start menu, select Settings, then Control Panel. Double-click Power Management. Set the times that you want your system to go on standby, to shut off the monitor and to shut off the hard disks. Click OK. Your computer will go on standby according to the schedule you have entered. b> Putting Your Computer in Hibernation b> From the Start menu, select Settings, then Control Panel. Double-click Power Settings. Click on the Advanced tab. At the When I Push the Power Button On My Computer screen, click Hibernate. Click the Power button. Hope this helps.

Sleep mode on a Windows 7 PC saves power without you having to turn your computer off and without losing any work. This option cuts the power to your monitor, powers down the hard drive and pauses all functions until you awaken the computer from hibernation. Whether you have a laptop, desktop or workstation, putting your computer into sleep mode will lower your electric bill and save money! Click the "Start" button in the lower left corner of your desktop. In the lower right corner of the Start menu, next to the "Shut Down" button, is a button labeled with a small, right-pointing arrow. Mouse over the arrow. The Shut Down menu appears. Point at "Sleep" and click on this option. Your Windows 7 computer goes into sleep mode. Wake your computer from sleep mode by jiggling the mouse. There may be a delay of a few seconds before your hardware powers on. All of your open programs are still open and your work is intact, just as you left it before the computer entered sleep mode. Configure your Windows 7 PC to go into sleep mode automatically when it is not used for a certain amount of time. Click "Start" and select "Control Panel." Click "System and Security." Click "Power Options." A menu opens. Click on "Choose when the computer sleeps" and select the number of minutes of inactivity. You can also set a separate time interval to put your monitor into sleep mode. If you set both to 10 minutes, then your PC and monitor will automatically go into sleep mode after 10 minutes of inactivity

Which operating system ?

Sleep mode on a Windows 7 PC saves power without you having to turn your computer off and without losing any work.

This option cuts the power to your monitor, powers down the hard drive and pauses all functions until you awaken the computer from hibernation.

Whether you have a laptop, desktop or workstation, putting your computer into sleep mode will lower your electric bill and save money!

Click the "Start" button in the lower left corner of your desktop. In the lower right corner of the Start menu, next to the "Shut Down" button, is a button labeled with a small, right-pointing arrow. Mouse over the arrow.

The Shut Down menu appears.

Point at "Sleep" and click on this option.

Your Windows 7 computer goes into sleep mode.

Wake your computer from sleep mode by jiggling the mouse.

There may be a delay of a few seconds before your hardware powers on.

All of your open programs are still open and your work is intact, just as you left it before the computer entered sleep mode.

Configure your Windows 7 PC to go into sleep mode automatically when it is not used for a certain amount of time.

Click "Start" and select "Control Panel." Click "System and Security."

Click "Power Options."

A menu opens.

Click on "Choose when the computer sleeps" and select the number of minutes of inactivity. You can also set a separate time interval to put your monitor into sleep mode.

If you set both to 10 minutes, then your PC and monitor will automatically go into sleep mode after 10 minutes of inactivity

Your Computer in sleep mode

First, save all of your work. Information in computer memory is not saved while your computer is on standby.

From the Start menu, select Settings, then Control Panel, then Power Management.

Click Standby Beside When I Push the Power Button.

Push the Power button.

Automatically Putting Your Computer on Standby

Save all work before leaving your computer.

From the Start menu, select Settings, then Control Panel.

Double-click Power Management.

Set the times that you want your system to go on standby, to shut off the monitor and to shut off the hard disks.

Click OK. Your computer will go on standby according to the schedule you have entered.

Putting Your Computer in Hibernation

From the Start menu, select Settings, then Control Panel.

Double-click Power Settings.

Click on the Advanced tab.

At the When I Push the Power Button On My Computer screen, click Hibernate.

Click the Power button.

Hope this helps.

My samsung shuts down with "PROTECTION".Help me to solve the problem.David ilomo.

Unfortunately, the unit is not going into "Sleep mode".
The PROTECTION error actually means that the unit is overheating.
The unit shuts itself off to avoid further damage.
Try to make sure that no other device is below the unit. Also make sure the unit has adequate ventilation on the back of it.
If not, call 1-800-7267864 and let them set up a repair order for the unit.

protection error message means that your unit's fan is not working

it is a feature to keep your unit from overheating

check if there is anything blocking the fan of your unit from rotating

if problem still persist replace the fan

power amp problem are you familier with electronics?

then we can do more.
shall we?????

protection mode activated to protect from serious damage and please follow me.1-shut down your system2-make volume in low position3-remove all your connected speaker4-switch your system on and watch if it does not go to protect mode insert your speaker one by one until you find the bad one and change it and start with cable change first and then speaker itself-if it goes to protect mode you must call service center.

Are you connected using R,G,B (component) cables? Check them to make sure they are in firmly - if so, then try a new set - that may very well fix the rolling issue. (Unless the rolling is caused by poor antenna reception).

Press "Sleep" on the original remote control for this TV if you still have it until the TV says "Sleep OFF".

If no strong TV signal is detected, this unit goes into sleep mode, which may explain Tuner B shutting off after 5 minutes.