Change on/off switch for model U5753-900
Hi! The on/off switch is located on the handle. To replace the switch, the handle would need to be replaced. Handle 39466088 can be purchased from an authorized service center or by calling Hoover Customer Service at 1-800-944-9200. To replace the internal rocker on/off switch it is recommended taking the cleaner in to a Hoover authorized service center for repair. Follow the link to locate the nearest service center to you. Service Center Locator Hope this helps!
SOURCE: hoover sweeper model U4263-930 belt change
undo screws on bottom of vac take out brush and belt put belt in then manewver brush in
thank you for useing fixya please rate me
SOURCE: how do i change belt on my hoover sweeper
get a fillipshead screwdriver, put the vacuum facing you so the brush is infront of you, you will see 4 screws on each corner.unscrew those and when you do there will be a space where you will see a shaft that points out. take the old belt off and put one part of the new belt on the shaft and the other part on the brush near the belt. (there will be a little brown part on the brush for the belt to lay on) make sure its secure and screw the screws back and your ready to go !
227 views
Usually answered in minutes!
×