My dvd is not working on the a superscan tv/vcr/dvd combo. Can i connect an external dvd player up to the tv?

Did you try these? 10093, 10864, 11944 and 0456?

Hi,
In order to watch either DVD or VHS on your TV ,you need to make the following connections ..

• You need to connect "DVD Player / VCR Combo" to" TV " as (Audio/video output of DVD Player / VCR Combo -TO- Audio/Video input of TV) ..
  

• use either "RCA analog (red/white +yellow ) " or "SCART "or "Optic " cable.(any standard optical cable )...if exist ,optic is the best way to connect it..Remember your DVD Player / VCR Combo 's "OUT" goes into" IN "of the TV ..

• pls also remember,wherever you connect your DVD Player / VCR Combo on your TV ,you should switch the source selector accordingly to correspond to the connection on the back...

Hope this helps!..if more help requires pls let me know.
Take care and please Remember to rate/vote and give me 4 Thumbs Up for me to continue for Helping out the Community :)

DVD's dont have coax output so you can use your RCA output (yellow,red and white) and hook to the input of your TV you just gotta select the input its on(i.e. Video1)

same problem piece of junk

If you have cable or satelite hooked up to it now and it works,Then it is digital ready.


Please rate this a fixya

the vcr tape mechanism may not be all the way up or the tape sensors need to be cleaned or replaced
you can test for voltage on the sensors and test each sensor for an open

electech

Is the tv a combo unit and has a vcr. well, the way this dvd recorder works it needs the signal of the material that is wanting to be recorded. fortunately it doesn't see anything else without some type of cable of some sort. just with the color cables it just acts like a regular dvd player. the best thing to do is get a hold of a external vcr and run color cables to this dvd recorder and then another set of color cables to your tv and put it on your VIDEO channel. refer to page 34 where it says connections for an external source. it illustrates it will and read carefully. sources: I USED TO WORK FOR THIS COMPANY;)

to connect a DVD player to your TV/VCR combo is :

DVD A/V output to TV/VCR Combo A/V INPUT In the back of TV , if TV doesnt have an auxilliary A/V input , then

the other solution is to get a RF Converter box that connects to where you connect the CABLE service .

thats it . hope this helps , please rate this solution , thanks AJ

The comcast remote control code for Superscan VCR/DVD combo is 11963