Canon pixma mp 830 on my fax activity report I

You need to apply Canon's firware update at http://www.canon.com and search for fumx310swin1040en.exe if you have Windows or for an iMac the file is MX310 series Firmware Upgrade Utility Ver. 1.040 (Mac OS X) with a file name of fumx310sosx1040en.dmg

NG = No Good. This means the fax did not go through.

NG only means the result is No Good. After the ng there should be an error number that tells what the problem is.

It means No Good or Not Good, fax was never received for a number of reasons.

It means No Good. 5 possibilities:

Receiving machine unplugged
Not a fax number
Wrong fax number
Busy signal
Digital Phone Line

Hi flyme.. I have the same problem but on an MF5770 all in one MFP. If anyone can solve this then wow.. I've been trying to find a solution for over 18 months now...

NG means NO GOOD or NOT GOOD Plug a regular phone into the wall jack and listen for a dial-tone.

Unplug the power cord for 10 seconds

those noises you hear are line noises via your phone line, not machine related but they wreak havoc on faxing. first you need to replace the actual line connecting the fax machine to the wall. If this doesn't fix the problem then have your phone lines tested. also make sure your machine is set for digital or analog service, depending on which you have. Good Luck.

NG 070 = Issue: ERROR LCD: CLEAR ADF, DOCUMENT TOO LONG
Solution: Reduce the length of the document

Reduce the length of the document to within 14" (356 mm).

my canon mp780 fax will not fax all my pages. one page my go threw while i refax and none will go. my error report shows ng for result.what does that mean??