Normal tv how do i unlock - Sanyo DP32746 32 in. LCD Television

It doesn't exist as you have written it. Normally I find the manual and research how to unlock it.

https://www.google.com/search?q=Protech+0716-PRL-32DT5-0141

..

You will need to set the U-verse remote to Channel Control Depending on Device Selected.

1. Press and hold the AT&T key on the remote control
2. While holding the AT&T mode key, press the OK key
3. Release both the AT&T key and the OK key
- All the mode keys will flash twice indicating programming
mode
4. Enter 966 by pressing the number keys on the remote
control
- The AT&T key will flash twice indicating correct entry
5. Press the Enter key
- The AT&T key will flash three times indicating successful assignment and return to normal operations.
If you press any key other than the mode keys or ENTER,
the AT&T key will give a long red flash and the remote control will return to normal operation. Should the remote control time-out before you complete the procedure you will need to start over.

Then set the remote to TV and press the orange "On Demand" button.

Presto TV unlocked!!!

Try this -

1. Press menu for main menu.
2. Press CH + or CH - to highlight preferences.
3. Press "OK" to enter preferences submenu.
4. Press CH + or CH - to high light "FPA"
5. Press VOL + or VOL - to turn the FPA on or off.
6. Press MENU repeatedly to exit.
7. Back to normal

• FPA stands for Front Panel Lock. It makes it so kids don't push all the buttons on the front of your TV. The power button on the TV will still work and the remote will still function as normal.

Regards, Tony

I had the same problem with my hyundai hf2215 tv. Hold down the DISP button on the remote for at least 30 seconds and the lock comes off and tv returns to normal.

is it a cable channel that is locked or a normal TV channel ??

if its the cable channel, you can always call your cable company and have them give you the unlocked code...

if its the TV channel... what make/model is your TV ?

Press and hold the "Music" button on the remote control until normal function resumes. (The problem in the Logic TV originated by pressing and holding the music button. Repeating this action solves the problem and unlocks the TV.

want to unlock the chanal,s on my soniq t.v. d.v.d combo

Press and hold the TV/AV button and then press the red on/off button, the TV screen will become black, and any buttons on the main unit or the remote control become inoperative. If you want to switch on the TV, press and hold the TV/AV button and then press the ON/OFF button again, the TV will return to the normal TV reception