Question about Neff U1421 Double circotherm Electric Oven

1 Answer

Neff oven wiring diagram

Which wire goes to which terminal of the element 2 wire one red one blue

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,510 Answers

It does not really matter which wire goes where. The red one would be live and the blue would be neutral, but on an oven element they could go on either terminal. Just make sure that everything is turned off when working on the oven etc.

Posted on Jul 22, 2014

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 75 Answers

SOURCE: Neff Fan Oven Element _U1661

hi there green and yellow is allways the earth connection which is usually the middle tag, what are the colours of the remaining wires and how many are there???

Posted on Feb 09, 2008

barkencoa

Barry Coates

  • 3463 Answers

SOURCE: what is the wire conection sequence

If there is no earth wire to the element, then it it does not matter which wire goes on the terminals of the heater, as they are common, so,as long as you do not connect the wires to earth, it will be o/k.
If one wire is green/yellow, then that goes to rearth.
Hope this helps.

Posted on Dec 22, 2009

barkencoa

Barry Coates

  • 3463 Answers

SOURCE: Have had 4 Neff oven elements in 2 years.

If you are not fitting genuine
elements, this is probably the reason they are failing so quickly.
You will pay a lot more for the genuine article, but they will last a lot longer.
Also make sure the fan is working o/k, as this can cause premature element failure.
please rate my solution.
Thanks.

Posted on Feb 07, 2010

Roipatrick

  • 906 Answers

SOURCE: Neff B1721 oven

good day,
hope this link below will solve your problem.

kitchen appliances

Posted on Jul 31, 2010

Roni Davey

  • 414 Answers

SOURCE: i have changed the element on a neff oven,the wires came off when i unscrewed it from the oven,i have taken the back off and there are 3 white cord type wires,2 of which have a red stripe and the 3rd

All the red stripes on one side, single (if you look carefully should have a black fleck in the cream cord type covering) on the other side.

Posted on Apr 13, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Neff 1541 not heating with replacement element


Yes two red flecked on same terminal and the black flecked on the other side terminal of the element. Bobs your Uncle......HEAT! Make sure they are a tight fit. New spades if required.

Oct 03, 2017 | Neff Ovens

1 Answer

Hi, Looking for a wiring/electrical diagram for Neff D39F56S0GB Extractor hood. Or could you Kindly point me in the right direction. Thank you


You can find the manual here:

D39F56S0GB/01

and here:
D39F56S0GB/02

It should come with a cable attached which should conform to standard wiring colour codes.

Red/Brown = Live/Feed
Black/Blue = Neutral/Return
Green/Green & Yellow = Earth

If the standard cable has been cut off there is a good chance it was for a reason and you shouldn't try to connect it without knowing how to determine which contact is for which (an electrician/electronics tech will know within seconds what should be connected where.)

Mar 07, 2015 | Neff Ovens

2 Answers

We are having a neff oven U15M62NOGB fitted. The wires in the booklet are earth on the left, live in the middle and neutral on the right. Is this correct as the neutral and live are the other way round on...


Yes, the installation instructions are correct. The wiring from your old oven isn't relevant.

Your query is a little confusing though. The new oven should have a power cable attached to it for connection to the mains supply. This should be on a separate circuit from your sockets and connected to an isolator switch. The wires in the power cable are colour coded to ensure that they are correctly polarised when connecting to the mains supply. I'm assuming you're in the UK as you list a GB model number, therefore, it should have a BROWN wire for LIVE, BLUE for NEUTRAL and GREEN/YELLOW for EARTH.

If your house wiring uses the old red (live) and black (neutral) colour coding, then you just need to ensure that the brown (live) wire from the oven lead is connected where the red wire from the supply is terminated. The blue (neutral) wire should be connected where the black wire is terminated and the green/yellow (earth) wire should be connected where the green wire is terminated.

Internally, the oven probably uses red cable for live and black for neutal, but you really shouldn't need to be doing anything with the internal wiring to install the oven.

You say you are having it fitted. Any competent installer would know (or check) the correct wiring order even if the instructions were missing. If you are installing it yourself, be sure are certain you understand what to do before attempting this and double-check the power for the oven circuit is off before you start.

Please rate this solution if you find it helpful. Thanks.

Oct 16, 2010 | Neff B1421 Electric Single Oven

1 Answer

What is the wire conection sequence


If there is no earth wire to the element, then it it does not matter which wire goes on the terminals of the heater, as they are common, so,as long as you do not connect the wires to earth, it will be o/k.
If one wire is green/yellow, then that goes to rearth.
Hope this helps.

Dec 22, 2009 | Neff U1863 Double circotherm super...

1 Answer

Replacing heating element in a built in aeg fan oven


Simply pull the wires off, and replace onto new element, it does not matter which wire goes on the terminals, as they are common.
Plz rate my solution.
Thanks.

Jan 13, 2009 | Smeg SE399X/5 Stainless Steel Electric...

2 Answers

Neff Fan Oven Element _U1661


hi there green and yellow is allways the earth connection which is usually the middle tag, what are the colours of the remaining wires and how many are there???

Feb 08, 2008 | Neff U1661 Double circotherm super...

Not finding what you are looking for?
Neff U1421 Double circotherm Electric Oven Logo

1,518 people viewed this question

Ask a Question

Usually answered in minutes!

Top Neff Ovens Experts

Paul Carew

Level 3 Expert

3476 Answers

xxxxxx xxx

Level 3 Expert

5013 Answers

Domenico Grillo

Level 2 Expert

170 Answers

Are you a Neff Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...