Typewriter won't feed paper or type, gives error 11408
SOURCE: We have an IBM 6747 electronic typewriter. When
On the rear of the print solenoid plunger is a plastic cap either white or yellow it is probably broken. They are available but a little tricky to install.
SOURCE: We have an IBM 6747 typewriter electric typewriter
Either the print solenoid is gummy or the plastic cap on the plunger is broken. They are available but a little tricky to install.
Yes it is worth fixing.
DickyO
SOURCE: All of a sudden, the typewriter quit typing.
The plastic cap on the print solenoid is probably broken, they are available but a little tricky to install.
DickyO
SOURCE: IBM Selectric II typewriter stuck in correcting position
If you know how to remove the right dust cover (black inside the T/W below the carrier) next to the R. side frame is the correction set up mech. spray some WD40 on the arms especially where they pivot, they should free up.
DickyO
SOURCE: needing bold typing on IBM Wheelwriter 6 Series II
To get bold you need a WW 10, 15, 1000, 1500 or any of the later models have this faeture.
DickyO
96 views
Usually answered in minutes!
×