Fex memory low

Hi,
Here you go...

Fridgidaire and GE Dryer Belt Replacement
http://www.fixya.com/support/r4245914-fridgidaire_ge_dryer_belt_replacement

heatman101

it is located in the cabinet of the dryer behind the drum the top needs to be removed and the front panel needs to be taken off then the drum removed

if you are still waiting for a solution on this here it is:
Each and every wire in this unit are labelled and so if you can see the labels on the four wires they would be labelled as FD, FDX, FE & FEX, FD & FDX should be connected to the two black dots and FE & FEX should be connected to the two red dots.

Have battery replaced at a shop that services Peavey amps.

low system battery peavey tube fex

what piece?

You can go here and get all the info you needhttp://www.appliancedesk.com/appliancedesk/service/Majestic/MJ9050V_service_manual.pdf

Your Profex likely has a dead NiCD battery. You are getting this error because this battery maintains your personal effect settings on an SRAM chip that requires constant power to "live". You can try reinitializing the SRAM on your unit by doing the following:

1. Power off your Profex.
2. Press and Hold the "PLAY" and "GLOBAL" buttons while powering the unit on.
3. You should see a message on the display that reads "MEMORY INITIALIZED". Afterwards the Profex should act normal.
4. If your internal battery is getting low or is already dead, it is going to start leaking (if it hasn't already). YOU NEED TO GET THAT BATTERY CHANGED NOW!!!!! If enough battery acid leaks onto the circuit board, it will ruin your Profex forever.

timeng belt fex