- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Some Pedometers turn off automaticaly once they stop moving after a while. Others just require you to press and hold a button for a while. Leave it alone (eithout movement) for 5min, if it dosn't turn off try holding a button for 30sec.
check that their is no pieces of paper broken off in machine and that all the paper sensors are not still jammed and moving freely then switch off machine for at least 30sec then switch on should work if not check again and make certain all covers and doors are properly closed
restart it... try this after you turn it off unplug it then hold down the power button for 30sec. and then plug it back in and restart it... I hope this works. what are you trying to do is to get rid of all the static in the printer chips which could trigger this problem. good luck
IS IT A GOOD QUALITY CD OR A HOMEMADE ONE ? SOMETIMES THE HOME MADE DISC DO NOT GET FINALIZED AND THEN THEY WILL ONLY WORK ON THE COMPUTER THAT MADE THE DISC
×