Bizub 164 maintanence m2 code remove - Minolta bizhub 180 Black and White Copier

https://www.copytechnet.com/forums/konica-minolta/62595-konika-minolta-bizhub-163-error-code-m2.html

Replace the developer and the drum make sure counters are cleared first and that Gradation adj is run along with Toner adj

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the drum and developer and then reset the counter

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

press the Utility button,
then Stop 0 0 Stop 0 1

then scroll to Clear Data, and then Supplies Data and clear.

You must be aware that clearing this counter clears the drum, developer and other counters.

Which are very important for copy quality, and not replacing them may cause more harm than good.

press the Utility button,
then Stop 0 0 Stop 0 1

then scroll to Clear Data, and then Supplies Data and clear.

You must be aware that clearing this counter clears the drum, developer and other counters.

Which are very important for copy quality, and not replacing them may cause more harm than good

MAINTANANCE CALL (M2)

Replace the drum and developer.

Bizhub 164 (M2) error

KONOCA MINOLTA 164
ERROR FOR MAINTANANCE CALL(M2) ,PLEASE SOLVTHE PROBLEM

2006 freightliner m2 code bh 164 don't star engine I don't now why !!!