Hi got the bosch exxcel 17 vario perfed, just under the tempaturater there is a swirling sign and a flashing key sing. it keeps beeping but wont tun on....how can I fix it??

SOURCE: bosch 1400 exxcel

The machine thinks the drain is blocked.. check the pump and outlet pipe for buildup of dirt.

I noticed holding start down for several seconds whilst powering the machine on, then turning it off / then on again would clear the machine's idea of where it was during a program. Does this affect the error code you're seeing?

SOURCE: bosch exxcel wf02465 wont spin

We had similar problem, with the spin cycle not working. We opened the 'drain' pipe (front-right bottom side). It was full of lime scale; never been opened for years. We cleaned it up and the spin cycle is now working.

Barry Coates

• 3463 Answers
• Posted on Jan 07, 2010

SOURCE: bosch exxcel 1200 express spinning slowly

I would suggest that you remove the motor, and check the brushes for wear.
If they are less than 3 or 4mm long, then they need to be replaced.
Hope this helps.

SOURCE: I have a bosch exxcel 1400 express and a key

check the manual . you can take the key mode off with the instructionsprobably a press and hold for 2-3seconds thing .If you dont have the manual you can get it from thermador. com they will order it for you. you will get it 2-3days. let me know how you made out:)

SOURCE: I keep getting error message F04

1. Loose debris blockin pump - Clean drain pump on the bottom of the machine,
2. Drainage pipe and or drainage hose blocked - I would like help on this as well.