How to fix error message less coffee - DeLonghi Magnifica 3300 Espresso Machine

Hi, I made a video how to fix your Jura step by step, good luck,!
http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

My built in SMEG coffee machine has a general alarm error, how do I fix it?

Maybe if you unplug it it will reset when plugged back in or if there is a float that is stuck down.

Hi...Grinder blocked message is ..when you make coffee there is no current going into the grinder. In other words the grinder motor is blown(coil windings in the motor is blown). You have to replace the motor. The problem is common with Gaggia, Talea, Odea coffee machines. hope your machine is less than 2 years old to get fix under warranty.

Had the wrench icon problem on a used Talea Touch that I bought.
Don't know how it started with the previous owner.
Solution - cleaned compressed coffee grounds from the grinder discharge. You need to manually spin the motor to clean all grounds from the rotation discharge gate.Also needed to probe and press the electrical connections to the motor. The brush spring and capacitors are press connected.
This solved the problem.
I've owned abnd repaired many Saeco machines. They are poorly designed and over priced.
None the less the majority of their problems can be fixed by simply cleaning the components.
Enjoy
MDR

Did you ever figure out a 'fix' for this? I am about to take a sledgehammer to this machine - the 'empty tray' message is preventing us from using it at all!

Did you find the solution? The same problem has just happened to me.

The infuser assembly can only be removed with the machine turned off. The infuser needs to be removed and cleaned at least monthly; more often if you use your DeLonghi at lot.

if you still have the receipt, you can get it repair or replace under the warranty, unless the warranty is for 90 days. in that case you are toast.
time for a new one.
replacing the parts is half the price of a new one.

I've been through this with my Dacor coffee machine. I believe there is NO fix! Dacor replaced my entire plunger assembly and now it keeps sticking. The too much coffee error has gone but now I'm getting a persistent group error because of it getting stuck. I agree with "lilyfish" I wouldn't have purchased it either and to boot they have stopped making coffee machines!!! I'm looking at a Miele now.