How do I set the clock on the kenmore brew wave

You have blown a fuse. Check inside the oven chamber and look for missing powder paint or signs of arcing, if so there is a paint to repair microwaves for this issue or else just dispose of the microwave. If the inside is good remove all the screws and remove the cover. Replace the fuse. If the magnetron was making louder noises prior then replace the magnetron. Since the fuse went the giant capacitor is likely bad. While the cabinet is open make sure to look for burned wires, check the continuity of thermal cutoffs, and check the main circuit-board for burned traces or components. The relays in most electronics are known for arcing (spot welding) and staying in the wrong position. Tap them hard with the back end of a screwdriver. During all of this use safe electrical practices by having the power cord unplugged. The capacitor could still have a high charge on it so be careful.

Looks like Martin Microwave Inc. has two left in stock...
Sears / Kenmore Brew N Wave Replacement Carafe

The link to EBAYS new auction for another carafe for the Brew Wave or search ebay for : 231083012756
http://www.ebay.com/itm/231083012756?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_95wt_1395

sears parts

It is leaking to earth due to spilliage on the connections I expect.
It is not safe to use in that condition.

HI. I have located the parts needed. I will place two links for the cover and the actual Carafe, as well, below:

Carafe Cover - 3550W1A231B

Carafe - 383EW5A162C

Please rate and have a great day:)

To find helpful exploded view diagrams and get part numbers, you can just enter your full model number at the Sears parts site.

A full Sears/Kenmore model number usually has 3 digits, a dot, then 8 more digits, such as ###.########

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

You should be able to find it at the Sears parts site.

Enter the model number from the tag on the unit.

A full Sears/Kenmore model number has 3 digits, a dot, then a few more digits, such as ###.##### or ###.########, etc.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Sears do not make the carafe anymore but this is something that I do that may help?
I took the top off the carafe an just placed it to the top of my coffee cup and sat the top part the holds the coffee on top of it and just poured the hot water from a cup I heated in the microwave. Do it very slowly until you get the it right for you, it works for and I hope it will do the same for you guys ?

they should be torx # 15 0r # 20 this is not aifficult tool set to get unless the manufacturer put high security type torx and those have a small nipple in the middle of the screw so the tool has a small hole in the middle of the end. Good Luck