How do i get the english language switched back onto my lexmark pro715 printer

Hi,

Let me know what code do you need ?

Check this article on how to get or set an IP address for your printer: http://bit.ly/SxPR9Z

Try to update the firmware of your printer. Just go to http://bit.ly/xuGIH6.

Also, perform a maintenance on the cartridges. To do that, on the control panel of your printer, Press on Setup > Maintenance > Deep Clean Printhead.

If the problem still exists, contact our technical support team to have the printhead replaced.

What do you mean pairing code? The printer and your computer just needs to be connected to the same network for them to be able to talk to each other.

Please follow the steps below to reset the Language on your Lexmark X3350 printer:

1. Power off the printer.
2. Hold down the power and + buttons simultaneously for five seconds. This will clear the language setting.
3. The first prompt you will see is English. If this is not the language required, toggle the + and - buttons to navigate to your preferred language.
4. Press the arrow button to select that language. The printer will save the new language setting.

Source: Wrong Language on the LCD Display of the Lexmark X3350

Try downloading and installing the drivers from Lexmark:
http://support.lexmark.com/index?segment=SUPPORT&userlocale=EN_US&locale=en&productCode=LEXMARK_X75&page=product&frompage=null#2
Make sure the printer is off and disconnected when you start the install, then connect and turn on the printer when prompted.

Here's a link to the Lexmark website to guide you on how to reset the language to English on the Lexmark X8350. http://bit.ly/aNYAXB. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.

To change the language on the LCD screen of the X125 printer, please follow the steps given below:
1. With the printer power on, press the "Setup" button.
2. Then press the "Menu" button until "Set Language" shows on the screen.
3. Press the "Options" button until you see "English."
4. Press the "Start" button once and let us know the results.

On the printer or on the program?
The program included can help you change the settings on the printer itself.

Go to the printer properties within Windows then to Printer preferences by right clicking on the Lexmark printer, look for language and set it to English. Press ok.

Go to the printer properties within Windows then to Printer preferences by right clicking on the Lexmark printer, look for language and set it to English. Press ok.