How do I register my 20v lithium hedge trimmer ?

Replacement Black & Decker LBX2040 Cordless Drill Battery
Type: Li-ion
Volt: 40V
Capacity: 2500mAh
Color: Black
Weight: 1250g
Dimension: 182.88 x 86.36 x 149.86mm

Please go to view more about this battery on http://www.drill-battery.com/buy.php/black+&+decker_LBX2040_drill+battery.html

http://servicenet.blackanddecker.com/documents/English/Instruction%20Manual/90614612,LST220.pdf?_ga=1.81549591.1256937551.1433767000


Your answer will be found on page 9-11

Please follow the link below to register.
http://www.blackanddecker.com/Login.aspx?referrer=http://www.blackanddecker.com/pages/my/prod/RegisterProduct.aspx

Register at the Olympus website: http://www.olympusamerica.com/cpg_section/cpg_registration.asp

go to user guide on line.

https://register.homelite.com/contact_us/new

Go to this page and fill out the form then choose need manual in the drop down menu for type of inquiry

Try this:http://www.blackanddecker.com/CustomerCenter/Default.aspx

I use a dremel with a sharpening stone, if u don't have one you can also use a power drill with a small sanding disk (1 inch) and course sand paper (30 or 40 grit). or you can use a bastard file. its too tight to use any kind of angle guide so just take your time and do it by eye. it shouldn't take much to get them sharp enough to do the job, over-sharpening is unnecessary and dangerous, and will make the blades dull faster. sharpen all the free blades, top and bottom, then start the trimmers to advance the blades to free up the sides you couldn't get. i use a light penetrating oil to clean the blades first, then lithium grease spray to lubricate.

I use a dremel with a sharpening stone, if u don't have one you can also use a power drill with a small sanding disk (1 inch) and course sand paper (30 or 40 grit). or you can use a bastard file. its too tight to use any kind of angle guide so just take your time and do it by eye. it shouldn't take much to get them sharp enough to do the job, over-sharpening is unnecessary and dangerous, and will make the blades dull faster. sharpen all the free blades, top and bottom, then start the trimmers to advance the blades to free up the sides you couldn't get. i use a light penetrating oil to clean the blades first, then lithium grease spray to lubricate.