MX-5111N with error code H5-10

F2 41 Is that the TONER DENSITY SENSOR is defective most likely.(CYAN) Here is a link to all error codes for your further reading.

https://www.sosnfl.com/sharp-mx-5111n-error-codes/

Sharp ARM 550/620/700 Reset Machine with Error Code ...

? 1:26
www.youtube.com/watch?v=BXs8PmMXFtk
May 5, 2011 - Uploaded by Thomas Trumpler hi thmas please tell me how to clear sharp mx-m620n copiermemory chip to use it ... How do I clear error code h3-00 on mysharp mx--453.

you should have an add account option or app.

H5-01 = 5 times continuous POD1 not-reach jam

reset with crop 14, then see why it is not reaching said sensor

SD card error..
Replace the SD card. Check the SD card socket. Replace the MFPC PWB.

I have a walkthrough on my website on how to secure print.

Check it out here under confidential printing:

How To Sharp Copier Printer Scanner Instructions Troubleshooting...

Take all toner out. Press P,*, CA, *. Go to 25. Then go to 2 automatic dv adjustment. Click kcmy at bottom and hit execute. Repeat 2 - 3 times. Then install toner and see if it works. There is a sensor in the dv unit that senses to much toner in there. Could be caused from worn out drums or dv unit itself.

You need to configure your print driver with the options that the machine has. Check out my How-To configure the sharp print driver.

How To Configure Sharp Print Drivers with Installed Options to print...

somewhat unleveled floor cant do i think

when your copier paper jam in fuser unit area. than show H5-01 error code.
if you fix it self,open right door and relese the jam paper carefully.