Instructions on programing my ge remote to a samgung tv

Never worked on one, but I found this. Seems a known issue.

https://www.google.com/search?q=universal+audio+apollo+twin+mkii+flashing+red+light

..

About 17,100 results (0.72 seconds) Search Results

GE Universal Remote Codes and Instructions ' direcTutor

www.directutor.com/content/ge-universal-remote-instructions
Enter the three or four digit code for your device using the number buttons in the GE Universal Remote. After your code is entered the INDICATOR LIGHT will ...Missing: naxa

Apex Digital TV Converter Box DT250 code ' ManualsOnline ...

tv.manualsonline.com/support/...digital/tv-converter-box/code-1082992
Nov 15, 2008 - Brock Search data: Universal remote control code apex dv converter... 4 I NEED CODE FOR APEX CONVERTER BOX FOR GE UNIVERSAL ...

Trouble programming Universal Remote to a DTV Converter ...

www.fixya.com/.../t2045188-trouble_programming_universal_remote_d...
Apr 21, 2009 - So I'm trying to program my GE Universal Remote to work with my Digital Stream Converter Box but I can't find the codes to do it... If someone ...

Control It All With Universal Remote Codes - Digital Landing '

download the manual for steps by steps from www. fitness.manualsonline.com or www. retrevo.com and fix it

God bless you

Here are the codes for your GE TV: 645, 742, 763, 531, 676, or 690.I have provided the instructions to program the DISH remote to your GE TV:AddressRemote to TV

1. While at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light up
2. Enter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light up

Ifyou are programming a code into AUX Mode, you must do the following beforeentering the device code:Press 0 for a TV (if TV code is 500, enter 0500)Press 1 for a VCR/DVD (if DVD code is 617,enter 1617) Press 2 for any other device (if device codeis 639, enter 2639)

1. Press the Pound (#) button - The mode button you are programming should flash three times
2. Press the large, red POWER button - The device should turn off

1. turn on device
2. press setup (underneath on/off) till red light stays on the take finger off the button
3. press and quickly release device button (tv,vcr,etc.) the red indicator blinds off once
4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press
5. press and release enter to install code

3-Digits Universal Remote Codes
4-Digits Universal Remote Codes
GE #24912 Universal Remote Instructions
GE Universal Remote Instructions

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

The codes that GE list for the Samsung are:
0105, 0077, 0076, 0109, 0007, 0009, 0004, 0005, 0085, 0172, 0942, 0358, 0012, 0015, 0080, 0104, 0106.

Also, here is a link to the .pdf of all the codes for the GE 24911 and all other GE four code universal remotes...

Code List for 4 digit Universal Remotes from the GE website. <-click here

press and hold "set" button then press tv button red come on release two button press vol- repeadly until tv goes off then enter.

If its a plain tv you would use the codes:

MAGNAVOX ... 1174 0062 0004 0009
........................... 0183 1133 0226 0288
................. 0456 0008 0068 0075 0141


Instructions
1. Press and hold the SETUP
button until the red
indicator stays on, then
release the SETUP button.
2. Press and release the
desired Mode button (TV,
VCR, etc.). The red
indicator blinks, then
stays lit.
3. Enter the 4 digit code from
the code tables. Note:
after a valid code entry,
the red indicator turns off.
For an invalid code, the
red indicator flashes.
4.With your device on,
press CHANNEL UP. If
the device responds, no
further programming is
required. Note: If some
buttons do not operate
your device, try one of the
other codes for your
brand.

HOW TO PROGRAM GE Remote Control DOING CODE SEARCH


1. turn on device 2. press setup (underneath on/off) till red light stays on the take finger off the button 3. press and quickly release device button (tv,vcr,etc.) the red indicator blinds off once 4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press 5. press and release enter to install code