At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
If you have no experience in maintenance printer, better you take to service center. Or just extend outlet pipe of head cleaning mech to outside. Just open case. Find diagram at printersiam.com
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The waste ink tank/pads for an Epson Stylus DX8450 printer are located at the bottom of the printer's housing, beneath the print head. Here are the steps to access and replace the waste ink tank/pads:
Turn off the printer and unplug it from the power source.
Open the printer cover to access the ink cartridges.
Gently push the print head to the right to move it to the ink cartridge replacement position.
Look for the waste ink tank/pads at the bottom of the printer housing, just beneath the print head. They may be covered by a small plastic panel.
Remove the plastic panel, if present, by gently pulling it toward you.
Use tweezers or gloves to carefully remove the old waste ink tank/pads from the printer.
Replace the old waste ink tank/pads with a new one, making sure they are seated properly.
Replace the plastic panel, if present.
Push the print head back to its original position.
Close the printer cover.
Plug the printer back into the power source and turn it on.
Reset the waste ink counter by following the instructions in your printer manual or by using a reset utility program.
It's important to note that replacing the waste ink tank/pads can be a messy and complicated process, and it may be best to have it done by a qualified technician or Epson service center to avoid damaging your printer or causing a mess.
Here are the general steps you can take to address this issue:
Check the Error Message: Carefully read and note down the exact error message displayed on your printer. This information will help when seeking support or replacement parts.
Contact Epson Support: Reach out to Epson customer support or visit their official website for guidance. They will provide information on how to proceed, whether it's through a recommended service center or other options.
Reset the Ink Pad Counter (If Possible): Some Epson printers allow you to reset the ink pad counter using specific key combinations or software tools. This process temporarily extends the printer's usability until the pad can be replaced. However, it's important to note that the ink pad will eventually need replacement to avoid potential ink leakage or printer damage.
Replace the Ink Pad: If your printer is within warranty or covered by a service agreement, contact Epson to arrange for the ink pad replacement by a qualified technician. If it is out of warranty, you can contact an authorized service center or professional printer repair technician to replace the ink pad
Ink means pad for waste ink nearly full. Epson program read and count all waste ink from head cleaning and ink charge. Next, you need reset waste ink counter, and replace or washing pad. You can extend outlet pipe to outside of printer, so next time you don't need replace pad again.
The ink pads are not washable. You have to replace them.
Then log on to epson.com/ipr to get the ink pad reset software. The software runs only on win vista and xp.
Inkjet printers have a fibrous pad inside them that collects the waste
ink from cleaning the print head. Over time, this pad fills up with ink
and can no longer hold any more. When this occurs, the printer
indicates a "waste ink full" error.
The waste ink absorption pads cannot be emptied, only replaced.
Replacing
the waste ink absorption pads is something an authorized canon service
facility can take care of for you. Once they are replaced,
it'll be functional again.
1. To clean physical pads: Open cover (as if replacing ink cartridge). Locate waste ink pads, they are far right under cartridge slider. Pry up waste ink pads (inky, might want to wear gloves). Rinse pads in sink or with alcohol, dry. Replace pads. Make sure pads are fully seated.
2. To reset waste ink counter: Press Menu-Scan-Copy-Scan to enter service menu. Use arrow keys to scroll to “Service menu counter access”. Press OK. Use arrow keys to scroll to “ABS-M DOT COUNT” Press Copy. Use arrow keys to reset count to zero. Press OK. Press Stop/Reset.
×