I plugged my htt-10crp massage chair to a 220v electricity and it stopped working. What do I replace to fix it?

They sometimes come up on eBay or Amazon, but nothing at the moment. Take the existing remote to an electronics expert and ask if they can test the circuit board components.

https://www.google.com/search?q=HTT-10CRP+remote

Remote Repair

https://www.google.com/search?q=massage+chair+remote+control+repairs

..

In most cases you can if you can get to the mechanism. There is a long threaded shaft and it may has a square of hexagonal head to it. Better to just get it fixed. Link just for interest.

https://www.google.com/search?q=htt-10crp+adjust+manually

..

My 2go password

THE DRIVE GEAR IS BROKEN SAME PROBLE IM HAVING LOOKING FOR PARTS HTT WILL ONLY SALE ME THE WHOLE BACK REST FOR THE CHAIR WHEN ALL I NEED IS A $5.00 GEAR GOOD LUCK

Where can i order parts. I need the complete cord and control.

Test the resistor for continuity if it has a continuity readind with the power off then it is bad, you can get the replacement parts at radio shack and change the fuse and the resistor out with a soldering gun.

This is a test by FixYa Staff.

MODS - DO NOT REMOVE

Thank you!

Just had this problem with our HTT 800. Discovered it was the curled phone-like cord attached to the remote that had been chewed through by one of our dogs. Some electric tape fixed it right up. Still looking for a replacement. Anyone know where I can find one? A standard-size phone cord does not work with this, as it is too large.

I would like to buy the remote control. My massage chair is HTT-9 series Human Touch Technology. [email protected]