How to remove the console upright of Proform XP 650E

Have you considered moving the doorway first? Or you could go with what all these other people are suggesting: turn up the speed and then ride it like a tank through the wall. If you have drywall you might slide right through. Please record the whole thing for the rest of us. We all need a good ab workout from laughing at the result. http://www.floridaaesthetics.com/medical-weight-loss

SEE THE VIDEO ATTACHED AND PROCEED .GOD BLESS YOU

Leave the machine for a few hours. You may not be giving it enough time. Also you may inadvertently changed the settings. Check that.

The Manage My Life site has the User's Manual: http://www.managemylife.com/mmh/owner_manuals/12266/PROFORM-Treadmill-L0912203 . The manual is a PDF so you will need Adobe Reader or a similar program.

I hope this helps.

Cindy Wells

sounds like someone waste water on it ....open up and blow dry with hair dryer

please see this videos and proceed according:

Dear Sir:

Please 1)adjust the reed switch see the diagram below 2) Change the baterries by new ones 3) Tigh the flexible cable from keypad 4) Tigh the connector from display board vs lower board.

Run inmediately after you did the step before software calibration for easy diagnose and troubleshooting.

If you can nor RUN your software calibration please see my personal TIPS, for easy diagnose and Trouble.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a

This condition is when the treadmill goes to full speed as soon as you power up the treadmill. Typically when this occurs, it is an indication of a short circuit in the motor controller.

change drive belt proform xp 550s treadmill

Did the shop only do a continuity check or a real load test with amp check also? Motors can look good and run with no load but fail under load.