ERROR CODE 016-214

Xerox CopyCentre C128 Black and White Copier

1 Related Answer

Patrick Carmichael of MRC

107 Answers
Posted on May 29, 2011

Solution : Power the Machine OFF and ON CAUTION: Wait at least 30 seconds between powering the machine OFF and powering the machine ON. Damage to the optional hard disk could occur.

Press the power switch to the OFF (O) position.

NOTE:

storingfiles

Press the power switch to the ON position.

IF THAT FAILS TRY THIS NEXT:
Solution : Clear the Paper Jam Behind Cover A

Open Paper Tray 5 (Bypass Tray).
Lift up the Cover A release lever, and open Cover A.
Remove any paper below the Fuser Unit by carefully pulling up and out.

WARNING: Do not touch the Fuser Unit, as it may be hot.

If the jammed paper is inside the Fuser Unit, lower the green A2 lever in the direction of the arrow to open the Fuser Unit Cover.
Push down and rotate the green A1 lever in the direction of the arrow to feed the paper from the top of the Fuser Unit.

NOTE:

Close Cover A until the cover latches.
Close Paper Tray 5.

For pictures on this procedure please follow link: http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=218,E=0000000002703126506,K=8100,Sxi=4,Solution=obj(1027)
Hope it helps!

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Xerox 4595 error code 062-380

Platen AOC Failure.
Power off completely and then power back on.
If the problem persists please Call for Service.

Read full answer

Jul 12, 2014 • Xerox CopyCentre C128 Black and White...

0helpful

1answer

What is the solution to solve Error code 027 452

Read full answer

Jul 09, 2014 • Xerox CopyCentre C128 Black and White...

0helpful

1answer

Drum cartridge problem is displaying on xerox copy center c128

U HAVE TO CHANGE THE DRUM CARTRIDGE OR IF UR A SERVICE REP U CAN ALSO CHANGE THE CHIP TO MAKE IT WORK

Read full answer

Aug 01, 2011 • Xerox CopyCentre C128 Black and White...

1helpful

1answer

Msir machine show error code of 010-327. plese tell me error solu.

The fuser is not warming up properly. Could have paper wrapped around it, but most likely the over heat popped. You will most likely need to replace the fuser.

Read full answer

Jun 03, 2011 • Xerox CopyCentre C128 Black and White...

1helpful

1answer

My xeros copy centre c128 is unable to make copies.The screen displays "a fault or an error has occurred.see user guide for information on fault code 073-210"

You can always find your answers at www.xerox.com./support
Two solutions to try: Related Fault Codes: 047-212, 047-211 Related Fault Codes: 071-210, 072-210, 073-210, 074-210

Links to solutions: http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=447,E=0000000002703236606,K=6528,Sxi=8,Case=obj(1908)
http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=447,E=0000000002703236606,K=6528,Sxi=8,Case=obj(2119)
Hope it helps!

Read full answer

Feb 09, 2011 • Xerox CopyCentre C128 Black and White...

0helpful

1answer

How do I do a password for the machine Xerox CopyCentre C128

Click on the link below and select to view the Xerox CopyCentre C128 owners manualm inside the manual will show you how to set the password

http://www.support.xerox.com/support/copycentre-c123-c128/documentation/enus.html

Read full answer

Dec 19, 2010 • Xerox CopyCentre C128 Black and White...

3helpful

1answer

For document centre c250 fuji xerox: error code 062-380 or error code 062-386

Defective IIt/IPS board. Is very expensive. Call you local Xerox service number and ask them for part number 160K99811 and how much it would cost to get it fixed.

Read full answer

Aug 04, 2010 • Xerox CopyCentre C128 Black and White...

1helpful

1answer