I own an x2gen LCD TV model MV37R. My problem is that i cant get anything on my tuner anymore. Everything else works on the TV but the tuner. I"ve tried to scan for channels and it says cable band detection failed. I even used the cable from another TV and that message still comes up. Also i was going to try to reset to default but it asks for a password that i dont even know of, is there a default password? So can you help me?
If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ Unlock procedure and to override the password lock and to set the device region free procedure of many popular brand TVs and other devices are given. Search the site by type in this key phrase "How to unlock television"; in the search box at the top left of the display window, to get gathered related posts.
SOURCE: Cnannel scan detects no channels
Kingscott,
Make sure the cable connection from the dish to the tv is
connected to the antenna/cable input and not the digital
input. Turn on the satellite receiver then auto program the
set with the receiver still on. If this fails to lock in channel
3 your suspicion regarding a faulty tuner could be correct.
A good way to check the tuner operation would be to hook
up another product such as a VCR with the rear switch set
for channel 3 and see if you can receive a picture from this
device. If it works the tuner is OK.
You can bypass the tuner by connecting an S-Video cable
and (or) a set of A/V (yellow,red & white) cables from the
output of the satellite receiver to the video 1 input on the tv.
You'll then have to switch the tv source mode to video 1.
Hope this of some help,
Caseybee
SOURCE: what remote control unversal can i use for tv
Your best bet will likely be a Logitech Harmony remote. They are pricey ($100-$400) but they seem to have codes for all brands. Also bear in mind that you may not necessarily require the code for your TV, a code for a compatible TV will usually work.
83 views
Usually answered in minutes!
×