How do I stop the clean light from blinking on my Hamilton Beach Brew Station?

The manual is available on the Hamilton Beach product page: http://www.hamiltonbeach.com/coffee-makers-legacy-products-brewstation-deluxe-12-cup-coffee-maker-47454.html#careguides . (If needed, click on the Use and Care Guides tab.)

The direct link to the Use and Care Manual is http://useandcares.hamiltonbeach.com/files/840160504.pdf . (Note: Adobe Reader or a similar program is needed to read or print the manual.)

I hope this helps.

Cindy Wells

here":

Hamilton Beach Coffee Maker Parts

Mine Too! So frustrating. I have to take out the coffee filter, then remove the piece that it sets in. Make sure and clean the spring and the hole in the bottom. This seems to cure the problem until the next time. It seems to get plugged up quickly. I have learned to rinse it out every time I make coffee.

You can run a cup of vinegar through the machine. Run it just as you would making coffee, except without the coffee. Run water through the cycle at least twice to remove sediment and the vinegar. Works like a charm.

The spring goes at the top of the stem, under the filter basket. This keeps tension on the basket, so it will pop up when you remove the cover.

Try to see your manual.

hi b1johansen,
 cln refers to "Clean"....
Thanks for using Fixya.
Do rate the solution as "Fixya" if 100%satisfied.

I had the same problem with mine when it was brand new. I called Hamilton Beach and told them what the problem was and they sent me out the new parts to fix it. It was actually the rubber gasket that was causing mine to leak. Hope this helps.

me to dont know, sorry

My brewStation 47214 stopped pumping water today, even though the warming element continued to get hot. A half dozen screws later I discovered a second heating element inside the coffee maker. The internal element is what heats the water and forces it into the basket. This element was burned out, religating my brewstation to the garbage. Probably last 3+ years.