How to print a network config report on a sharp al2040cs

IPv6 is upgraded from IPv4 (Internet protocol).. Its implemented in 1994 this adres is stored in DNS, it is no way connection with the printer, when the printer is connected through lan net work, auto IP adress will assign by the DNS server depend up on the settings.. you can change the desire IP adress with the family range. If the printer is not showing IPv6 adress, system administrator can help you in this regards depens upon their permissions. Selected printer IP adress ahould be with in the family range and no IP conflict definately printer will work..

Printing reports
:
How to print a report

1 Press Reports.

2 Press ? or ? to select the report you want.
Press Menu/Set.
-OR-
Enter the number of the report you want to print.
For example, press 2 to print the Help List.


Following reports are available

1.Transmission
Prints a Transmission Verification Report for your last transmission.

2.Help List
Prints the Help List so you can see at-a-glance how to quickly program your machine.

3.Quick-Dial
Lists names and numbers stored in the One-Touch and Speed-Dial memory, in numerical order.

4.Fax Journal
Lists information about the last incoming and outgoing faxes. (TX means Transmit.) (RX means Receive.)

5.User Settings
Lists your settings.

6.Network Config (MFC-7225N only)
Lists your Network settings.

Hi! just add new printer in device manager and give it your printers ip address there.

for the scanner use the al-2050cs driver

code is not true.enter (C interrupt zero interrupt)42 start 1 start

Press the "check mark" on the control panel. Press the > until you see "reports". You are looking for "Reports" or "config reports" Hit the "check mark" and print the Config Report. It will tell you how much memory it has.

dear friend

just press menu

then you will find reports press ok

then you will find config report or something like that

press ok

you will get the print

thanks

Replace the toner cartridge.

Hi!

I was able to locate this information for you on tht Toshiba FAQ section of their tech support site. Here is it, verbatim:

How do I discover the MAC address of the Brother network card?


To discover the MAC address of your Brother network card you will need
to print out a Network Configuration Report. To print this report
complete the following steps:

1. On the Brother machine press MENU.

2. Use the up or down arrow key to scroll to PRINT REPORTS and Press OK.

3. Use the up or down arrow key to scroll to NETWORK CONFIG and Press
OK.

4. Press BLACK START

5. The Network Configuration report will print. On the report, find the
section labeled <(><<)>Ethernet Address>. (Example: <(><<)>Ethernet Address> 00-80-77-90-0a-8c) This is the MAC address of your
Brother network card.