What is the best driver for wua-1340 - D-Link Wireless-G USB 2.0 Adapter (WUA1340)

you will have to open up your network connections

click start control panel network connections this may vary depending on your operating system look for local area connection if you see a red X or a yellow exclamation or question mark ! ?
you will need to update or install the driver or it could be firewalled

click start control panel administration tools computer management device manager scroll to network adapters should see a yellow question mark? right click install drivers
the driver might be on the disc supplied by your ISP internet service provider
or the motherboard disc or you might download one if you dont have on a disk
http://download.cnet.com/d-link-airplus-g/3000-2112_4-84765.html

http://download.cnet.com/d-link-wua-1340/3000-2112_4-92021.html

hope it helps

There is no drivers required for using a router. All the routers communicate to the computer through an ethernet port. So only the ethernet port drivers for your computer has to be installed properly. there is no seperate drivers for routers.

If you go to the link I have provided you can down load the driver
http://download.cnet.com/D-Link-WUA-1340-USB-Adapter/3000-2112_4-92021.html

Go here: http://www.dlink.com/products/default.aspx?pid=WUA-2340&tab=3

click on 'support resources' choose country and then download the required driver

Hi,

try to give a static ip address of router's ip range on the w/l network connection of the computer and then try to reconnect. Chk the driver version of the adaptor if old the try to download the latest version from the d-link website.
Still problem persists then finally try to change the w/l setting of the router.

thanx and regards
Sukhiii

There is no way that you can view the encryption key. It negates the purpose of creating one. You will have a to create a new one unfortunately.

You can find the installation drivers here:

http://support.dlink.com/products/view.asp?productid=WUA%2D2340

Best of Luck!

please open a comand prompt and try to release the ip and renew the ip. check is the Ip changing.

or

turn on the DHCP in your router.,. so the router will give an ip to you pc

Hi,
You can download it here:
http://www.dlink.com/products/support.asp?pid=477

Cheers!

you can obtain one at the silicon valley.