How to change pc mode of sharp into tv mode - Sharp LC-32SB24U 32 in. LCD TV

menu--setup-settings-ratio

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/david_2f6e03df6c124197

The service menu for this TV may be accessed by holding down the INPUT button on the TV and pressing 2580 on the remote. To navigate the service menu use the arrow keys on the remote. The center Enter button is used to go down into a submenu. The Menu button returns from a submenu. The exit key exits the menu.

There is an option to adjust Over Scan in the Picture settings menu. Set the positions to zero and the size to +100 for both horizontal and vertical. Then set the Sharpness to zero in the Picture Mode menu for each picture mode (optional, but sharpness makes text and sharp lines really ugly if you're using a PC).

I've owned this TV since Feb. 2013 and I've been disgusted with its lack of disable-able overscan and forced to use VGA to get a usable picture. The VGA port finally started going out (flickering colors) and rather than tearing it apart to resolder the VGA connector I tried to find a service manual again. Found one for a different Apex LCD TV but the service code was the same. It's like having a brand new, much better TV now! Overscan is the worst thing the TV industry ever did, it's totally and completely unnecessary on digital, pixel-perfect signals.

I'm not really familiar with that model, but most televisions now have different "modes" you can put your television into. Common modes are Picture, Movie/Cinema, PC/Computer, and there are others. I would check to see in your Video or TV setup area if there is a Custom mode that you can set your TV too, as if it is set to one of the Pre-Set modes (it sounds like it is in Cinema mode) it would need to be taken out of the pre-set mode before you can make changes to the color and picture settings.

i had the same problem in a sharp tv 32". on the remote control there was a view mode button, i changed the mode and the pc input label in the left upper corner gone

You need to set your MAC video resolution to the native resolution of this TV in PC mode, please read your manual to find out what that is, if the resolution is set too high, the TV will not be able to display it.<br /> <span style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"><a href="http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide">http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide</a></span><br /> <span style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> </span><br /> <span style="FONT-SIZE: 10pt; FONT-FAMILY: Arial; mso-bidi-font-size: 12.0pt; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA"><a href="http://s807.photobucket.com/home/budm/allalbums">http://s807.photobucket.com/home/budm/allalbums</a></span>

change picture mode from (STANDARD)or other modes and put tv in CUSTOM then you will be able to change the contrast

make sure all cables are in

You can download a copy of your manual from the sharp web site for free. Just click on the correct TV model number. Here's the link for you:
http://www.sharpusa.com/products/TypeManuals/0,1083,127,00.html
If your TV model is not listed, let me know. Tell me what is you TV model number and I'll try to find a copy for you.

Go to setup and reset to factory default. You will be asked the TV LOCATION (Store or Home). You must choose HOME. Hope it helps.

Sharp 42" lcd. TV accessed incorrectly. Resulting in no picture.
Using TV remote, changed from analog 2 to input 4. Turned off TV remote. Returned to satallite remote, turned on TV, turned on satallite, still no picture. We seem to have power but no satallite signal. Ist time users of satallite TV.

I had a same problem with sharp LC-40LE340E. The service told me to change motherboard but I decided to buy a new LG TV. The sharp TV I left unplugged for a 50 days and after that when I tried again the tv started normally. I was Really surprised. Don't spend money just wait and check again. [email protected]