Question about Humminbird 997c Si Combo Color Fish Finder And Gps Chartplotter, Without Transducer

Open Question

Hummingbird clarity problem

Cant see screen clearly

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 170 hummingbird beeps and wont stop even when i go through the menu and turn the alarm off on everything is this another piece of junk ????


Doesn't it show the cause of the alarm on screen? It might be the low voltage alarm which on some units can't be turned off, but can be adjusted to a lower voltage if it's alerting unnecessarily.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/oscar_403cc49e0f00cda7

Jun 15, 2015 | Cars & Trucks

1 Answer

How do hummingbirds fly backwards


A hummingbird can rotate each of its wings in a circle, allowing them to be the only bird which can fly forwards, backwards, up, down, sideways or sit in sheer space. To hover, hummingbirds move their wings forward and backward in a repeated figure eight, much like the arms of a swimmer treading water.

Hummingbird Facts at Hummingbirds Forever

Hummingbird Facts at Hummingbirds Forever

Feb 18, 2015 | Citrix UPG PRES SVR PLATINUM ED FR/ ENT...

1 Answer

Humminbird


My 787c2 screen just shows lines across it does anyone know were to get a new screen for it hummingbird says they don't stock them anymore try Humminbird Fishfinder Depth Finder Humminbird GPS Chartplotters...

Jun 14, 2013 | Humminbird Boating

1 Answer

Problems with clarity of screen and graphics when on the internet (stationary graphics, not gaming)


On all broswers? Try Google Chrome for a comparison. Only on IE? Not on the desktop?

Feb 07, 2013 | Fujitsu LifeBook P7010D Notebook

1 Answer

How to reset CANON LBP 5050 COLOR printer for cartridge chip problem


after more then 400 pages prints i got toner empty message. i refilled black toner but i didnt get clear print out and error messages occured.i gave catridge to reset chip.but they said it cant reset and gave me new chip.but when also i didnt gets clarity prints, some pages has less clear and other very ugly.pls suggest solution.is it cant reset the chip of canon lbp5050

Nov 25, 2010 | Canon Office Equipment & Supplies

1 Answer

I have a hummingbird matrix 67 gps chartplotter fish finder. It developed a problem with the screen. The outer edges are legible, but the center is damaged. Is it worth repairing. Are there any other...


Hummingbird will refurbish that one for around 150US dollars, better then 500+ for a new one. If the screen is subjected to direct sunlight and heats up it can go out. This is why they discontinued the 67 model and replaced it with the 767.

Apr 21, 2009 | Humminbird MATRIX 67 GPS Receiver

1 Answer

Bad clarity of webcam


Hi Rahul,

The clarity may be caused by the lighting conditions in your room or the light in your room is positioned behind you and in front of the camera. You can try having the light in your room in front of you.

Oct 21, 2008 | Logitech Webcam

Not finding what you are looking for?

Open Questions:

0 Answers

My Humminbird 997c SI is stuck in loading screen I had downloaded latest software updates for my Humminbird 997c SI and my 1197c SI.Then was attempting to update them one ata a time following typical software updates for these units like I had done in the past, resetting factory settings then running software update. My 1197c SI update perfectly with no problem, then moved up front to perform update on my 997C SI and went through same process as mentioned before. I turned around for less than a minute and turned back around to a black screen. When attempting to turn the power back on it started the loading screen and then stayed there for over an hour. I brought the unit inside and connected to the PC via USB cable and opened my HumminbirdPC. I made it to the Matrix Boot screen by holding the "View" button down and proceeded to toggle down to the #9 "Program" command and again pressed "View" to start to HumminbirdPC recognition sequence. My unit is not recognized by the software and the unit came back with a "Programming Failure" response. I have attempted this several times and even brought the 119c Si in to try,keep in mind the 1197C Si is up to date... However thinking that the 1197C SI would load and be rcognized, now both units have the "Pragramming Failure" response when trying to get Humminbird PC to recognize them!? I have my PC with Windows Vistaup to date as I just went through a 26 item update with windows, including service pack 2. I have all Drivers up to date, all Security updates and still no recognition. I thought maybe it was something with my PC... So I borrow my wife's work computer which is a Dell with Wi ndows XP and her company keeps it updated thoroughly. Same result... Then borrowed my Sons MAC that runs Parallels and has Windows 2000 on it. No Luck!! I have exhausted all ideas and could use some additional ideas if someone has any. Any input would be appreciated to get the 997C SI up to date. I have heard tha it is appx $200 to send it in to Humminbird and the new 998c is outrageuosly expensive. Thank you in advance for any HELP!?

May 29, 2012 | Humminbird 997c Si Combo Color Fish Finder...

0 Answers

My Humminbird 997c SI is stuck in loading screen I had downloaded latest software updates for my Humminbird 997c SI and my 1197c SI.Then was attempting to update them one ata a time following typical software updates for these units like I had done in the past, resetting factory settings then running software update. My 1197c SI update perfectly with no problem, then moved up front to perform update on my 997C SI and went through same process as mentioned before. I turned around for less than a minute and turned back around to a black screen. When attempting to turn the power back on it started the loading screen and then stayed there for over an hour. I brought the unit inside and connected to the PC via USB cable and opened my HumminbirdPC. I made it to the Matrix Boot screen by holding the "View" button down and proceeded to toggle down to the #9 "Program" command and again pressed "View" to start to HumminbirdPC recognition sequence. My unit is not recognized by the software and the unit came back with a "Programming Failure" response. I have attempted this several times and even brought the 119c Si in to try,keep in mind the 1197C Si is up to date... However thinking that the 1197C SI would load and be rcognized, now both units have the "Pragramming Failure" response when trying to get Humminbird PC to recognize them!? I have my PC with Windows Vistaup to date as I just went through a 26 item update with windows, including service pack 2. I have all Drivers up to date, all Security updates and still no recognition. I thought maybe it was something with my PC... So I borrow my wife's work computer which is a Dell with Wi ndows XP and her company keeps it updated thoroughly. Same result... Then borrowed my Sons MAC that runs Parallels and has Windows 2000 on it. No Luck!! I have exhausted all ideas and could use some additional ideas if someone has any. Any input would be appreciated to get the 997C SI up to date. I have heard tha it is appx $200 to send it in to Humminbird and the new 998c is outrageuosly expensive. Thank you in advance for any HELP!?

May 29, 2012 | Humminbird 997c Si Combo Color Fish Finder...

Humminbird 997c Si Combo Color Fish Finder And Gps Chartplotter, Without Transducer Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Humminbird Boating Experts

fordexpert

Level 3 Expert

5692 Answers

Bill Eager

Level 3 Expert

459 Answers

Mike

Level 3 Expert

4357 Answers

Are you a Humminbird Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...