Outdoor temp isn't showen? - La Crosse Technology The Weather Channel WS-9160U-IT Digital Thermometer with Indoor/Outdoor Temperature

The display has the internal sensor for temp and barometer, The 5 in one has the sensor for outdoors and shows temp, wind speed and direction, humidity and rain. With the added lightning detector having the additional temp sensor in it, the system is redundant. It is recommended to put the sensor outside for best results that t have the least interference and maximum range..

since this question is very non specific i.e., no brand name, model or serial numbers, I can only assume that this is the type of unit that monitor the outdoor temp and does not require any settings. If you need more info, please include more details. Thanks.

My clock display of the outdoor temp is only blinking and not display the the temp. I have the senser put in in outdoor window. The senser shoes the temp but is not carried over to the clock. Ive put in new batteries and have the senser in the correct distence from eachother. Why is the clock contunue blinking outdoor temp.?

Ldvs receiver, it is the print wich reformats the image...

Must be a short in the electrical, change battery and if not then it may be your alternator. Also check to make sure plug in going from alternator isn't damaged or dirty in the plug itself. If you had an alarm set up in it they also could of done it incorrectly.

I have the same problem. Any ideas? My guess is that the outside temp sensor is defective.

you need to properly re partition the hard drive
try c: max size

Wall clock quit showing outdoor temp. Batteries are fresh.

P4 code outdoor compressor air exhaust temp too high/outdoor ambient temp too high/ compressor enclosure temp switch break off/module temp too high. Compressor is not running because it has an over temp alarm. Fix/repair thermocoupler