Kenwood ddx514 radio codes? - Kenwood KDC-MP228 CD Player

SOURCE: How do I get my kenwood ddx514 out of demo mode?

Same problem here..After couple of hours found the temporary solution. 1. Turn it off 2.Turn on and wait about 3-4 sec and press eject button long press The disk will come out

Chris Briggs

• 160 Answers
• Posted on Jan 09, 2010

SOURCE: Kenwood DDX-514 label wires

90% of new and aftermarket harness' are the same, Red any Yellow are Constant 12v and ACC. 12v. Black is ground, Green is rear left speakers, Purple is the right rear. White is front left and Grey front right. Blue solid is Power Antenna, Blue with a white is an AMP Relay. (Which is another 12v ACC) You should have some sort of AV in/out lines for the rear screens, if that was an issue.

SOURCE: looking for a user manual for kenwood ddx514

http://manual.kenwood.com/files/4a56e08041683.pdf

Driven Audio Ltd

• 162 Answers
• Posted on Feb 04, 2011

SOURCE: looking for over ride code for a kenwood ddx514

You will need to visit an Authorized Dealer or service center for that product to get the unlock code reset. You can find a dealer listing on their website, or call them.