- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remove it, (Don't forget water will come out when you uncscrew it!!!) clean it thoroughly, especially the ends, clean and check seating of any rubber washers to make sure they are fitted correctly and not being distorted when the rings are tightened, reseat it with no force (it should sit naturally without having to force it in) and tighten rings. There are lots of videos on youtube showing how. If you cant stop it leaking buy a new trap. It's worth while looking very carefully for exactly where the leak is before you remove the trap, it might be coming from higher up. Repair Leaky Sink Drain Pipe
Pipelines and also Wrenches will certainly be needed for this action. For the simplest installation acquire a brand-new vanity and also sink that coincide dimensions as the old ones.
Cabinet
style vanities are the most popular style.
They are mounted on the floor, along a wall and have a mirror installed
above. Here is what a typical cabinet
style bathroom vanity looks like -
Shelf
vanities are typically the most simple as far as style is concerned. They consist of a single shelf (or a few
shelves) mounted near your sink and a mirror.
This style is ideal for small spaces.
You may want to get the 3 or 4 sink antiquevanity. On the net you can try this website: http://www.bathgems.com/antique-vanities/on the right side you can sort the vanities by . Good Luck!
Standard Vanity height is approx 34.5". A vessel vanity is approx 31" high. If you cannot remove the legs from your existing vanity then it will have to be replaced or cut down to the correct height. The reason a vessel vanity is lower is because your sink will be approx 3 to 6 inches higher than a standard drop in sink. This may be more work than it is worth. Vessel sinks most often will require a solid surface top, either glass, stone or another type of composite material. The standard laminate vanity top has a particle board substrate which will detiorate quickly at the drain location.
Pegasus is Home Depot own brand of bath room fixture. The contact number should be on the installation instruction or the warranty sheet.
you shold contact Home Depot if you cna't find the contact number.
×