Rec tuning error in nokia 6600

www.mobiles24.com/.../tag/MP3+Player/nokia-6600-slide-java-appsDownload Free MP3 Player Nokia 6600 Slide Java Apps to your mobile phone via WAP or PC. Send MP3 Player Free Nokia 6600 Slide Java Apps to your cell ...

Lets fix that
How To See Current Auto Tuning Settings
1. Open a elevated command prompt.

2. Click on Continue in the UAC prompt.

3. In the command prompt, type in bold belowand press Enter. (See screenshot below)
netsh interface tcp show global

4. Close the command prompt when done.

5. Run through the steps below to see if you have a TCP/IP Auto Tuning issue



STEP ONE
How to Restrict Auto Tuning
1. Open a elevated command prompt.

2. Click on Continue in the UAC prompt.

3. To Restrict Auto Tuning
NOTE: Allows for the receive window to grow beyond the default value of 65,535 bytes, but limits such growth in some scenarios.
A) In command prompt, type in bold below and press Enter. (See screenshot below)
netsh interface tcp set global autotuninglevel=restricted
B) You will get a OK response if successful. If not, repeat step 3A.

C) Go to step 5.
4. To Highly Restrict Auto Tuning
NOTE: Allows for the receive window to grow beyond the default value of 65,535 bytes, but doing so very conservatively. In this mode, Vista will by default use a RWIN of 16,384 bytes with a scale factor of 2.
A) In the command prompt, type in bold below and press Enter. (See screenshot below)
netsh interface tcp set global autotuninglevel=high
B) You will get a OK response if successful. If not, repeat step 4A.

5. Close the command prompt window and restart the computer to apply the changes.

6. If it fixed your problem stop here. If not, continue to Step Two below.




STEP TWO
How to Disable Auto Tuning
NOTE: Disables the autotunning feature in Vista completely, and sets and locks the RWIN receive window to the default value as 65536 bytes.
1. Open a elevated command prompt.

2. Click on Continue in the UAC prompt.

3. In the command prompt, type in bold belowand press Enter. (See screenshot below)
netsh interface tcp set global autotuninglevel=disabled
Note
You can also type in bold below and press enter after each command:
netsh
interface
tcp
set heuristics disabled
set global autotuninglevel=disabled
exit


4. You will get a OK response. If not, repeat step 3.

5. Close the command prompt and restart the computer to apply the changes.

6. If it fixed your problem stop here. If not, you may not have a issue with Auto Tuning and will need to turn it back on. Continue to Step 3 below.




STEP THREE
How to Enable Auto Tuning Back to Normal Default
NOTE: This turns Auto Tuning back to the default on (Normal) setting in Vista. Allows for the receive window to grow to accommodate almost all scenarios. See NOTE at the top of the tutorial for more on this.
1. Open a elevated command prompt.

2. Click on Continue in the UAC prompt.

3. In the command prompt, type in bold below and press Enter. (See screenshot below)
netsh interface tcp set global autotuninglevel=normal
Note
You can also type in bold below and press enter after each command:
netsh
interface
tcp
set heuristics enabled
set global autotuninglevel=normal
exit


4. You will get a OK response if successful. If not, repeat step 3.

5. Close the command prompt and restart the computer to apply the changes.
That's it,
Hit me back for more tweaks

hello,the screen is faulty from the problem you posted above,this can equally be fixed.all you need to do is to get another screen to replace the faulty one.

I will suggest you take it to a mobile phone engineer to help you fix it,and this will make your screen come back to normal as it was.

Take care.

First, what's your mobile phone? Have you tried updating the firmware? Maybe the phone memory is to filled that's why the phone's slow.

deactivate msg alert tone off. urs suresh9848417656

i also have the same problem...white screen display

There might be a problem either with the program you are using or with nokia 6600 .if you are using facing problem with program try to reinstall that file,but if you think that your mobile is having problem than you can format your mobile or flash your mobile .When you flash your mobile ,it will become new as you you purchased means factory settings....
A. Blank screen phone unable to boot-up. B. Phone is only able to boot-up to “Nokia” screen (may flash “Nokia” 4 times also).
C. Install a program but unable to uninstall it.
D. Unable to delete certain files on C drive. WARNING: This will ERASE EVERYTHING on your phone
If you have any files that are important to you, make backups.
1. Make sure you phone is fully charged.
2. Backup your contacts list and personal files to MMC memory card (if possible).
3. Switch-off your 6600 phone.
4. Press and hold these three keys together
-Green dial key,
-Star key (*)
-Three key (3)
then press the power on/off to swtich on the 6600 phone.
DO NOT let go the three keys until you see the “formatting” screen displayed
5. After a few minutes, the format will be complete. Your 6600 will now be at its original factory settings.Disclaimer: I will not be held responsible for anything that happens to your phone as a result of following my guide. Use this guide at your own discretion and risk.
---------------------------------------------------------------------------------------------
If this answers your question please rate this as fixed.
If you need more help just add a comment and I'll be glad to help you further... Thanks

dilipbagdi - [email protected]

try to format your memory card by your mobile. when it is formated in pc the mobile says the card is been corrupted. so format your mmc in your mobile itself

hi,

 

    Ok u do one thing just remove the memory card from ur mobile & give a code *7370#..it will do hard reset on ur mobile..so before doing that just save ur cntcts & all as they all will be delted if they r in sim memory.

 

Thanks

Gizmo1

Dear. just make if simple flash.