How to disable ap isolation - D-Link DIR-615 Wireless Router

Try the site at the link for that info. https://forums.att.com/t5/AT-T-Fiber-Equipment/AP-isolation-Or-client-isolation-on-an-Arris-NVG589/td-p/5366938

http://screenshots.portforward.com/routers/Netgear/WNR1000v2_-_Genie/Advanced_Wireless_Settings.htm
uncheck enable wireless isolation

You will need to login to the UI for the router to change the mode from AP back to router.

1. Check your NETGEAR router settings
2. Uncheck Enable Wireless Isolation This step will disable AP Isolation.
3. Uncheck Disable IGMP Proxying This step will turn Multicasting ON.

Follow these four page guide to changing your 327W to bridge mode. This should solve your problem.

Changing your VersaLink 327W gateway to Bridge Mode High Speed Internet...

Contact Arris.
ARRIS

Mark
Motorola Support

Contact Arris Support

ARRIS

Mark
Motorola Support

Disable the router's SSID broadcast.

You need to login to the routers web interface and the settings will be in the advance WiFi section, probably a tick box.
A typical web interface can be found at the following address in your browser http://192.168.1.1/
Username usually admin and password could be password or blank or 1234 or admin. Check with manual.

Dear all just disable wireless isolation [between SSID]