Question about Samsung AQV36JA Classic 36000 BTU Single Zone Ductless Heat Pump Mini Split Air Conditioner System

1 Answer

Why my unit keep shutting off after few seconds and then turbo light keep on flashing?

My unit keep shutting off after few seconds and then turbo light keep on flashing?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 34 Answers

Operation =
Flashing Display Timer = Yes
Turbo =
LED Display = E1
Explanation and Checking points = Indoor unit room thermistor error - Open or Closed Circuit - Check and replace if required

Operation = Yes
Flashing Display Timer = Yes
Turbo =
LED Display = E2
Explanation and Checking points = Indoor unit pipe thermistor error - - Open or Closed Circuit - Check and replace if required


Operation =
Flashing Display Timer =
Turbo = Yes
LED Display = E3
Explanation and Checking points = Indoor unit fan motor malfunction - Check and replace if required


Operation =
Flashing Display Timer = Yes
Turbo = Yes
LED Display = E6
Explanation and Checking points = EPROM error - Check and replace PCB if required


Operation = Yes
Flashing Display Timer = Yes
Turbo = Yes
LED Display = Flashing
Explanation and Checking points = Option code error - Check and input new option code if required via wireless remote controller


Operation = Yes
Flashing Display Timer =
Turbo = Yes
LED Display =
Explanation and Checking points = Outdoor unit temperature sensor - Open or Closed Circuit - Check and replace if required

Posted on Jun 19, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mr slim indoor fan shuts off


Might change the battery on your control. I wish these had a hard wire thermostat not a big fan of the remote can be confusing.

Mar 19, 2013 | LG LS-L1210CL Mini Split Air Conditioner

1 Answer

1992 Hilux surf turbo not running properly


take it to an accredited turbo repair shop for a proper diagnosis and quote

Jul 13, 2017 | 1992 Toyota 4Runner

1 Answer

Car stalls and battery light comes on.


Have the alternator tested. Repair or replace if bad.

Feb 15, 2010 | 2002 Volkswagen Beetle Turbo S

1 Answer

I dont know how to pull the codes on a 1993 volvo


Volvo Code Retrieval Accessing Trouble Codes 89-93 models (and later non-turbo/non-OBDII models)

Fuel Codes Locate the diagnostic unit behind left strut tower and remove its cover.(see image) Connect selector cable to socket #2,which tests the fuel codes. Turn the ignition switch to the ON position(engine not running). Enter the diagnostic mode by pressing the push button on the diagnostic unit for at least 1 second, but not more than 3 seconds. The red LED light will start to flash,count the number of flashes in 3 flash intervals. The flashes will be seperated by 3 second intervals.Make note of all codes. If no codes are stored,the LED will flash 1-1-1,which means the fuel system is operating correctly.
3f6367f.jpg


Ignition Codes To access the ignition codes,follow the above procedure,but with the selector cable connected to the #6 socket on the diagnostic unit.
NOTE:Turbocharged models may have seperate codes for the turbo system and are accessse by hooking the selector cable to the #5 socket.

Rate this.

Dec 28, 2009 | 1994 Volvo 940

1 Answer

55" TV keeps shutting off automatically


Green light flashes 5 and then red light flashes 6

Sep 14, 2009 | Sony KDF-E55A20 55 in. LCD Television

8 Answers

Everstar MPM1-10CR-BB6


The directions have the steps to take when a "P1" error is flashing.

1) Remove the plug (the upper black plug not the lower) and attach the included drain hose.
2) Put a bucket under the hose.
3) Press the TURBO button for MORE THAN THREE SECONDS. The WATER INDICATOR will begin flashing telling the user that the FORCED WATER DRAINAGE feature is activated. You will even hear a little whirring noise.
4) Wait until the WATER INDICATOR stops flashing and no more water is flowing out of the drainage tube.
5) After the water is finished flowing, make sure that you FASTEN the DRAIN PLUG. Of course, failure to do this will flood the area.
6) The unit should now work.

You can also move the unit somewhere that you can remove the plug and let the water flow freely (you do not need to have it plugged in for this method) and once the water is finished, replace the plug and fire it up. It should then work correctly. It's also mentioned that the water should be drained quite often to prevent corrosion. I do it every few months and of course when winter approaches.

I like this air conditioner and have had really nice luck with it. A little loud but who cares. That's why there are SUBTITLES on the television.

Hope this helped.

RoC

Jun 17, 2008 | Danby DPAC8020 Air Conditioner

3 Answers

Mitsubishi vs-5043 Shuts Down


do you get any "blinking/flashing green/red light" ?

Dec 02, 2007 | Mitsubishi VS-5043 50" Rear Projection...

2 Answers

Samsung DLP HL-P5063W


you have the same problem I have. The problem is fixed by changing the new light bulb. The problem appears again after 1500 hours of use. You can keep buying new light bulbs or avoid it by not buying another Samsung TV.

Sep 23, 2007 | Samsung DLP HL-P4663W 46" Rear Projection...

2 Answers

Filter light keeps flashing


The light flashes after a certain amount of run time. It is a reminder to check the filter to see if it needs cleaning. Once you have checked/cleaned the filter and reinstalled it, press the filter button for 5 seconds and the light should go out.

Jun 18, 2007 | Whirlpool ACQ158XP Wall/Window Air...

Not finding what you are looking for?
Samsung AQV36JA Classic 36000 BTU Single Zone Ductless Heat Pump Mini Split Air Conditioner System Logo

1,157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Heating & Cooling Experts

gbob59

Level 3 Expert

3042 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Cindy Wells

Level 3 Expert

6031 Answers

Are you a Samsung Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...