I am not getting the lights on my BizTouch 3 to light up, nor can I pick up any of the calls that are incoming when I hear other phones ringing. I can make calls myself, also others in the office can transfer a call to me and I can pick up, but there are no lights , lighting up. Neither does my voicemail light, light up. But I can pick up my voice mail because the display works fine.

Check your phone wiring in the wall socket is ok

Please tell me what kind of phone.

Help! When we transfer a call to an extension that is set-up to go to a cell phone. the cell phone receiver has issues picking up the line. The automated systems says to "Press 1" to pick up the line. The receiver press's 1 but the call gets dropped.

Hi and welcome to FixYa!

Well if that's the case, the printer should be detached or powered of during call operations. The printer detects incoming calls that's why it triggers it to operate. Turning it off during operation will surely be the solution.

Hope this helps and thank you for using FixYa! Have a good one!

Sounds like you haven't placed the viocemail answering ports in hunt group 7(#505) remember that on a partner mail vs that the ports go in reverse.

On the intercom, if it's a TA or similar phone system, dial 7311# for call waiting on outside lines and 7321# for call waiting on the intercom. (0 cancels).

Carl

if your phone had set for ringging assignment, u no need to press any key to answer the call.
check the indicator light,
if green light turn on, u can direct answer the call
if red light turn on, u ned to press the line to answer the call
kindly ask the phone provider the set yr extention for incoming ring assignment

No response. closing

just set the amount of rings higher on the back of the phone and make sure all you old messages are deleted and also make sure its not set to do not disturb

Below is for when you are using machine in fax mode, is that how you use it or are you also using the answering machine function? ie TAD mode

 

 

If desired, you can change the number of rings on which the fax machine

answers incoming calls in FAX mode. Any number from 2 to 5 can be

selected.

1 Press FUNCTION once and 3 times.

Display:

OPTION SETTING

To select FAX mode, press

(with no document

in the feeder) until the arrow in

the display points to FAX.

RESOLUTION/

RECEPTION MODE

RESOLUTION/

RECEPTION MODE

FAX

A.M.

TEL

Using TEL Mode

58

2 Press once and once.

3 Press once.

4 Enter the desired number of rings (any

number from 2 to 5).

Example: 3 rings

5 Press to return to the date and time display.

Note: If you are using Distinctive Ring, the fax machine will answer calls after

two rings regardless of the above setting.