How to print a configuration page from an HP LaserJet P1102

THEN GET A NEW ONE

Go to www.hp.com/support and let the site auto detect your printer and download the driver automatically

That machine doesn't have a control panel but you can test it by printing out the configuration page

Configuration page denotes total gape count..
Press menu button...scroll to information..enter...scroll to configuration page...enter..

Here's a solution HP has that explains how to print wirelessly from iPhone for that printer. Review the different options and find the solution that works best for you.

HP Printers and Supported Mobile Printing Solutions

I am an HP employee.

Go into the Printing Preferences and Click Services. It should come up to a page that says Print Information Pages. Drop the arrow down to configuration page. It's the second Drop Down Arrow

Press and hold the red X button (cancel) until the green light starts to blink.

Found this in a HP support forum
You'll need to load the entire 'HP LaserJet 1000 Printing Software Solution' so you'll have access to the toolbox. Once you've got the toolbox installed you'll be able to print a configuration page and see the page count.

Here's a link that should get you to the software downloads:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&pnameOID=45675&taskId=135&prodTypeId=18972&prodSeriesId=45674&submit.y=0&submit.x=0


Original Post:
http://h30499.www3.hp.com/t5/Printers-LaserJet/Laserjet-1000-page-count/m-p/324372

Network Configuration page
NOTE The Network Configuration page is only available on the HP LaserJet p2015n,
HP LaserJet p215tn, and HP LaserJet p215nw printers.
A Network Configuration page prints whenever a printer configuration page is printed. You
can also print a Network Configuration page by pressing the network Reset button at the
back of the printer
The Network Configuration page provides information about the network configuration,
including the IP address, firmware revision, network statistics, protocol information, and so
on. The Network Configuration page automatically prints when you print a configuration
page from the control panel.
ENWW Printer information pages 37
Using the HP Toolbox
The HP Toolbox is a Web-based program that you can use for the following tasks:
● Check the printer status.
● Configure the printer settings.
● View troubleshooting information.
● View online documentation.
You can view the HP Toolbox when the printer is directly connected to your computer or
when you are using a supported network connection. You must have performed a complete
software installation to use the HP Toolbox.
NOTE You do not have to have Internet access to open and use the HP Toolbox. However, if you
click a link in the Other Links area, you must have Internet access in order to go to the site
associated with the link. See Other links for more information.
To install the HP Toolbox, you must install the TCP/IP protocol and the most recent version
of the Java™ Virtual Machine on the computer. You must also install the DOT4 protocol for
all USB connections, LPT connections for Windows 2000 and Windows XP, and LPT1
connections for Windows 98 S.E., Windows Me, and Windows NT 4.0. See the system
administrator or computer manufacturer's documentation for more information about
installing the TCP/IP protocol and the DOT4 protocol.