We have a Toshiba DKT2020-SD phone how do I activate the DND mode?

Check if any call forwarding or do not disturb settings are activated on the DKT2020 phone . In addition, you can reboot the phone

If there is a Dnd butto programmed, it will be located on the top right hand side. By pressing the do not disturb button the ring wil be abbreviated. otherwise it you will have to go into the phone system programming to make that phone not ring.

Have a dealer come back out and reprogram the telephone .. at

Hi, You can check the manual here
http://phone.manualsonline.com/ex/thread/view/idThread/343173
http://www.p1bc.com/toshiba/toshiba_dkt_2/DKT2020-SD.htm
Regards,

FOR THE TOSHIBA DKT 2020-SD:

From main console phone (lowest extension number i.e. x100) pick up handset and dial following codes:

For Time: Press "Intercom" and the numbers 652 enter the time in military format HHMMSS (HH=hours in 24hr clock, MM=minutes, SS=seconds) press "Redial".

#6092 is the code for CTX systems, if you are on an older DK look for a light lit up on the right hand side and simply turn off.

I turned the volume down

This is a feature that your local phone company will be able to help you with. The feature is called 'call forwarding'. After you purchase the feature, they will give you instructions as to what you must do to activate/unactivate it.

Hello:

I had the same problem Yesterday.

The way uoi change it, is you have to find the phone with the lowest extension, either 0, 10, 100, 200 etc....

Once you find that phone, leave the handset on the base.

Press Intercome, you should hear the speakerhone activate.

Press #,652

You will see it say ENTER TIME

It's on a 24 hour clock. HHMMSS Format, so it it is 2:05P.M., you would time 1405XX (XX means seconds, obviously not at critical as the touror minute.

Then press REDIAL to submit the change.