Olevia VCF-32FDV1U remote not working and can't change volume on tv

SOURCE: Remote control codes

Juni,
You'll have to look it up by the remote you're using... Then by the brand of Tv you're trying to control.. try here..
http://www.remotecodelist.com/remotes/

Bill

SOURCE: RCA REMOTE CONTROL CODE FOR OLEVIA/SYNTAX 237 HD TV

Go to Best Buy and buy the DirectTV Universal Remote Control Model RC64 ($20). It will control all the functions on both the Olevia TV and the RCA Satellite box, except the A-B-C-D buttons for the User Guide. It's codes are:

Satellite Box - 00392

Olevia TV - 11610

Enjoy!

Nick from Ft Myers

SOURCE: QUESTION ABOUT PROGRAMMING CABLE REMOTE TO T.V

the code for olevia for cox cable is 1610. Hit tv then hold setup till light blinks twice. release setup. enter 1610 and wah lah

SOURCE: FIOS remote with Olevia 532B12

I just got FIOS and had an Olevia 237 TV. Tried the LG, Phillips, RCA and Yamaha codes, no luck so I tried this:

- press and hold TV key
- still holding TV key, press the OK key and release both, device keys blink
- press 922
- point remote at TV and press play button
- press next button (two arrows pointing to right) about 325 times until the TV goes off.

Remote controls power, volume, input, and aspect.

SOURCE: remote code for dish network remote to control olevia tvs

Please follow the steps below to program your remote control to equipment other then your DISH receiver:
Note: If you start this procedure and at any time and do not press a button within 20 seconds, the remote will end the procedure automatically. Simply start over again. Use the TV button for your TV, the VCR button for your VCR or DVD player. These Mode buttons are located at the top of your remote control.
1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate, then release. 
2. Press the numbers 5-0-0 on the remote control. 
3. Press the Pound (#) button on the remote. 
4. Press and hold the correct Mode button until all mode button backlights illuminate, then release. 
5. Press and release the Power button on the remote control. 
6. Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off. 
7. Press the Pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. 
8. To verify the code works try several different functions for that equipment. 
We cannot guarantee our remotes will work all other devices. If this does not correct the issue, unfortunately our remote will not work for that device. We apologize for any inconvenience this may cause.
Lone99star. Please rate this solution.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...