Zanussi zdcb47209w runs 4 30 secs then red light **** on and stops any ideas pleas

this user manual should cover your 1600 machine
try page 17 of the 28 page document
start looking for a lint filter or clogged pump issue

http://laundry.manualsonline.com/manuals/mfg/zanussi/zwx_1605_w.html?p=16

Some appliances malfunction can be displayed in hexadecimal or in binary code.
So your device is defective and shows you what's wrong. You have to count how many times flashes red light and how many times flashes green light. Red light shows the first error number and green light the second error number.
For example: you forgot to close the door and you started washing machine. After some time (timeout) will generate an alarm. Four times will flash red light and once the green light which means error code " E41 " or "Open door"
" E20 " means "No drain water"
" E10 " means "No fill up water"

Dado

It is possible that the selector dial is not correctly positioned.

Try it.

See if it is overloaded or the clothes are excessively wet... Take out 1/2 the clothes and try again.

Check for a blocked filter. Or it could be your pump thats failed.

pleas help me!!! My computer has no display no beep. it blinks the Problem with the Biostar MCP6P-M2 Motherboard - v6.0,

Heater fault start with the element

dryer not heating

I think you should read the instruction manual . 3 beeps means some information to begin a solutin.

Pump jammed or filter blocked, check filter if not blocked remove pump and replace if faulty. Regards Advisor