How to disable password of bizhub 350? - Konica Minolta bizhub 350 All-In-One Laser Printer

In correct code for a Bizhub 350. What is the model # Bizhub Fuser errors start with 34, 37 ,38 for the Bizhub 200/350

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

1-Press "Utility/counter" button on basic panel of your printer.
2-Press "Administrator settings"
3-Press "Admin-2"
4-Press "Network Settings"
5-Press "IP settings"
6-From this menu you can disable/enable network settings.DNS Settings, DHCP, Auto, manual, etc all network settings are in this menu

reset the maintenance. replce the develper nd drum consumbles

this will happen if account track or authentication is enabled on the machine to enter a password for the driver go to the driver properties and click on printing preferences then the user authentication/account track button and you can enter your password there it would be the same password that you enter to make a copy

You can try the default admin password which is 12345678

Konica Bizhub c350 default password is 12345678 give that a try

Set the Gateway TX to "Allow"

1. Press the Utility/Counter button.
2. Touch Admin Management
3. Enter Password (The default password is 12345678)
4. Touch Admin2
5. Touch Network Settings
6. Touch Network Settings1
7. Touch Scanner Settings
8. Touch Gateway TX
9. Set Gateway TX to Allow

click here for the steps on how to configure the bizhub 350 and here for the vista driver that you need to use if you're going to install it in a vista computer

hope this'll help you

ciao

The default is "12345678" If it has been changed then you are outa luck eh.

What you require can be achieved though the "public access" settings. This will allow you to control what can happen without requiring a log in.