HOW CAN I GET MY SONY EARBUD REMOTE TO WORK PROPERLY

If you are experiencing a "driver" issue with your JLab Bluetooth earbuds not producing sound on your Windows 10 PC, you may need to download and install a specific driver for the earbuds to work properly.
You can try the following steps to download and install the driver for your JLab Bluetooth earbuds on Windows 10:

1. Go to the JLab Audio website and search for your specific model of earbuds.
2. Click on the "Support" or "Downloads" tab.
3. Look for a "Drivers" or "Software" section and download the appropriate driver for your earbuds and Windows 10.
4. Once the download is complete, open the downloaded file and follow the on-screen instructions to install the driver.
5. After the installation is complete, restart your computer to ensure the changes take effect.
6. Connect your earbuds to your PC and check if the sound is working.

If the problem persist, you can reach out to JLab support for further assistance.
Note: Before you download and install a driver, it's important to make sure that the driver is compatible with your specific version of Windows 10 and your earbuds model.

1. Check to make sure that the earbud is fully charged. If it is not, charge it for at least 30 minutes before attempting to turn it on again.
2. Make sure that the earbud is properly paired with your device. If it is not, try pairing it again.
3. Check to see if the earbud is properly inserted into the charging case. Make sure that the charging contacts on the earbud and the charging case are clean and free from debris.
4. Try resetting the earbuds by following the manufacturer's instructions.
5. Try connecting the earbuds to another device to see if the issue is with the earbuds or the device they are connected to.
6. If none of the above solutions work, it is possible that the earbud is malfunctioning and will need to be repaired or replaced. Contact the manufacturer for further assistance.

It's important to follow the instructions carefully and if you have any doubts or difficulties, consult the earbuds user manual or contact the manufacturer for assistance.

I'm the author of the question - I fixed it by yanking out the earbuds, taking a call and reducing the volumne down from max with the earbuds unplugged. After that, I was able to adjust the phone call volume with the earbuds (JVC HAFX32A Marshmallow Earbuds) plugged in.

Che k the end of ur headphone jack also check where its being put into possibly to rule out its not faulty headphones i sugest try them on something else then u can rule that out

It could be your MP3 player earbuds might need some cleaning or It could be you're not positioning the earbuds properly. Watch this youtube video for some tips - www.youtube.com/watch?v=pluIp1navz8

Please contact me, I have a the left earbud of sony nc10

[email protected]

-Have you try this headphone plug to other device to find out it does the same thing or not.
-If it work with other then that meant your device's jack is worn out.

Good luck


Mai

broken wire or connection

They should come apart right where the metal meets the plastic, just below the buds themselves - be careful, one set like that I took apart were actually surface-mounted to the housing, there weren't any leads to repair...