Pop sound i would think a main capacitor has gone, on the power board. it could be just the capacitor or the voltage regulator has gone as well and blown the capacitor. it could also be the diode that has for pins has + & - on it with 2 squiggly lines on it when this goes it can go with a bang and there will be no power light or anting, and it also blows the 5 volt side of the tv. so all the parts would need replacing.
SOURCE: mitsubishi ws-55613 55in.
Four bad capacitors in DM module = common repair for
qualified Mits tech.......................T.
SOURCE: STATUS LIGHT SOLID RED ON 73 DLP MITSU MODEL WD73735
The colorwheel is your problem. To confirm this, unplug the tv, then listen thru the air vents in the back as you plug the tv in. You will probably hear a ticking sound. If you do, that is the colrwheel. If the colrwheel is working, youwill be able to hear it "spin up". It will be a sudden high pitch whine. Let me know if I can be of further assistance
SOURCE: mitsubishi-ws55859 power failure flashing timer green light
the capacitors on the DM need to be replaced. Very easy repair you can get the repair kit at this link which is for your model it contains the replacement capacitors and step by step insturctions.
http://servicemanuals.vstore.ca/product_info.php/pName/v21v19-mitsubishi-dm-repair-kit/cName/repair-kits
SOURCE: I am getting error code 34 on my DLP TV. the bulb
the 34 error is a lamp abnormality, So if the lamp is new the Ballast or the Power Board could be the issue however the ballast would be more suspect.
117 views
Usually answered in minutes!
×