Where can I find frigidaire 1964 30" compact stove knobs?

Question edited for clarity and name of maker 'fridgerdair'.

You have a non-standard prototype model that only exists in your house. You will need a service call. The control knob needs replacing, or the burner element under the glass needs replacing.

https://www.google.com/search?q=FGE93045KFA

..

look the number up on sears the ebay it

Good Afternoon Friend,

I understand you are trying to get assistance on how to access the burners on your glass-top Frigidaire range, model# FES365ECA. I suggest contacting the manufacturer. They might have some type of diagram that will assist you in replacing the burner. My other suggestion would be to contact your local authorized technician for further assistance. The technicians have been trained to replace parts on your range. Hope this is helpful.

-Best Regards-
WP

Dang... I tried and tried to locate help for you and even
Frigidaire Has no 'hits' for that specific model number? I see many photos of "Frigidaire stove tops" but none link to YOUR number?

Can you please double-check your model number?

Trust me ~ I've spent almost 25 minutes trying to research this for you.

Anthony

the knob is probably stripped. if the stove is from 1950 you may want to consider replacing it. If it is not to expensive to replace the knob you can try that just email the company and see if they can send you a replacement knob

Sharon,
Pull out stove from the wall,
Unplug stove. Now you are safe!
With a phillips screwdriver, remove the backpanel.
The switch you are replacing, remove knob.
Remove the two screws that hold the switch in place.
When switch is free, remove one wire at a time, and make sure you put them on the new switch as you remove from old.
Fasten switch in place, close up the machine. plug it in
Enjoy your new buner
bweazer

I have the same model stove for sale. here is my number 678-644-2161 samantha

imsert your model number here, you can download a complete parts manual



http://www.frigidaire.com/support/manuals.asp

1-turn oven control to lock
2-push in and turn the stop dial knob to set a cleaning time of aprox. 1 hour
3-push the start dial knob in . this will make the locking mechanism to operate (wait 15 seconds)
4- turn the stop knob back to the"0" setting on the cleaning dial. the knob will pop out waight 15 seconds to allow the mechanism to unlatch the door
5-open the door
6 push the stop dial in to return it to the manual position
7- turn the oven control knob to off
8- close door.
basically your just repeating a cleaning cycle to reset the lock mechanism

There are 2 possibilities:
1) Are there 2 knobs to control the oven? If so, they may be switched.
2) Depending on the thermostat used, it may be possible to put the knob on upside down.