Cannot hear Skye ringing thru headset otherwise sound is good

not a radio communications issue

Check that the BT headset supports short ringtones like messaging
try the same thing on another (non Iphone phone)

The phone may be in headset mode. If you can hear sounds through the headset but cannot hear sounds from the earpiece on the phone, it's in headset mode. Power down the phone and restart it. Otherwise no sound from the earpiece mean a bad earpiece.

Unfortunately no. The phone ringer has to be a certain volume for the lifter microphone to pick up the ringing vibrations. If you put it to low, you will not be alerted to the incoming calls. When you're at your desk and can see the incoming calls, maybe then you can lower the telephone ringer volume for some relief.

Good luck from Headsets Direct!

I have just bought a K850i. One time I calling somebody but I could not hear any sound from the phone.I could not hear its ringing when i make calls and cannot hear the voice of the person I am calling.I used the loudspeaker its work properly the voice quality is good. Please help me solve this problem.Thank you.

Same problem here with a BlackBerry 8830. Elsewhere found a solution for another model that worked for mine:

1) Plug in headset.
2) Turn off BB.
3) Remove phone battery.
4) Reinstall battery and let phone restart.
5) Remove headset.

what you need to do is just for you to change your ear piece

make sure you have the profile set to headset. Goto your look through your phone settings.

Make sure that your speakerphone is OFF.

either the headset is not supported by Vista, or you need to right click on both speaker icons, normally coloured red and black and in the properties you need to see if your headset is listed as one of the microphone input devices, if you need to make the Logitech headset the default mic and not the windows generic mic. If you do not see it in the properties then it may not be recognised by Vista.