Display most recent Caller ID telephone numbers not old ones

Did you change carriers? A lot of the VoIP carriers like vonage and magic jack will only give you the telephone number on caller id, but not the name.

I have magic jack now and they call that "caller id", but having moved from a carrier that had name attachment i assumed all caller id's had name and phone number both...but not so

Who made this device? Contact customer support.

The Avaya 3158-05 does not have a display. It can't show the Caller ID information from the telephone provider. The Avaya 3158-07 PARTNER 18D or the 34D will display Caller ID information if your system is connected to a telephone line. (One of these modules: 206EC, 308EC, or 400EC, is required. If you have a T1 line, you can't get Caller ID.)

I hope this helps.

Cindy Wells

Caller ID (caller identification, CID), also called calling line identification (CLID) or calling number identification (CNID), is a telephone service, available in analog and digital phone systems and most Voice over Internet Protocol (VoIP) applications, that transmits a caller's number to the called party's telephone equipment during the ringing signal, or when the call is being set up but before the call is answered. Where available, caller ID can also provide a name associated with the calling telephone number. The information made available to the called party may be displayed on a telephone's display or on a separately attached device.

This feature lets you know who is calling

without looking at the display.

To use this feature, you must:

- subscribe to a Caller ID service of

your service provider/telephone

company.

- turn this feature on (page 24).

When caller information is received, the

handsets and base unit announce the

caller's name or phone number received

from your service provider/telephone

company following every ring.

The unit announces in English only.

L Name pronunciation may vary. This

feature may not pronounce all names

correctly.

L Caller ID service has a limit of how

many characters can be displayed. If

the caller's name is too long, the

handset may not be able to display or

announce the entire name.

L The announcement is heard at the

same level as the ringer volume (page

16, 23).

L If you turn on the answering system

and set the number of rings "2

rings" (page 36), the unit does not

announce the caller information. If

"Toll saver" is selected and there

is a new message, the unit does not
announce the caller information.

Log into your TalkSwitch Management Software.
Go to Telephone Lines.
Under each incoming line make sure that Caller ID is checked.
Click File> Save
Hopefully this will fix it for you.

I can think of 2 possible causes:

1) The call originated from an International location and you are seeing a partial originating telephone number.
2) The originating caller has a type of telephone service that allows their telephone system to generate the digits that appear on Caller ID displays. Their telephone is creating that strange looking telephone number.

My guess is that the first cause is the correct one.

You can try googling the numbers on the display to see if anyone else has had this happen to them. Your telephone service provider could run a trace on the call, but that would require going through a legal process that, if this is a one time event, would really not be worth the hassle.

I have a DK824 I bought in 2000 which did not have called ID capability - that was explained to me on purchase - if yours is 2 years old they must have kept the models the same for a long time though

For people who have purchased cordless phone in usa and caller id is not working they should purchase fsk to dtmf converter at any local phone shop and caller id will start working.

Here is the article on various frequency used by various countries for caller id.

Hope this will help you out.

Detailed Product Description

There are 3 major caller ID specifications in the world: DTMF, ETSI FSK and Bellcore FSK. When users buy a foreign telephone devices(such as cordless phone, fax machine or computer telephony interface), may encounter the problems of non-match for caller ID standard. This will cause the device unable to display the caller ID. EX220 can solve this problem easily. This product can receive all 3 kinds of caller ID format, and convert to FSK(Bellcore or ETSI selectable) to match foreign telephone's standard.
EX220 has a rechargeable battery inside the device, during idle status, it gets power from the telephone line and recharge the battery, so no need to use or replace battery. Just plug one end to telephone line, and the other to the telephone device.
For example, if you live in Netherlands, Saudi or India, the caller ID standard is DTMF. You purchased a cordless caller ID phone from US(which uses Bellcore FSK standard), or from Germany(which uses ETSI FSK standard). You won't be able to use the caller ID feature. In this case, just get one EX220 and connect it between the telephone line and the cordless phone, your cordless caller ID phone will display the caller's number immediately.
Remark:
1. Telephone sets for UK and Japan standard are not applicable.
2. In some countries, users must subscribe to Telecom for caller ID service

Feature List
Caller ID Format Conversion --- Convert 3 kinds of caller ID(DTMF, Bellcore FSK or ETSI FSK) to ETSI FSK or Bellcore FSK(selectable)
Date/Time Stamp --- The DTMF caller ID doesn't content date/time stamp. User can set up clock of EX201, so each call will be sent with actual date and time stamp
Area Code Setting --- User can set up the area code, so the dial back feature can easily applied
Rechargeable battery powered by line --- Just connect to the telephone line, the built-in rechargeable battery can get power from the telephone line, no need any external battery nor power supply

News
Now, Multi-Line caller ID converter is available.

How to get the caller ID to work on the additional GE DECT phone handsets. You must follow these steps in the exact order :
#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes. reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in.
It takes about another 10 minutes after that before all phone handsets start recognizing caller ID.