Ml-8951 tech mode - Samsung CLX-3175FN Color Laser All-in-One Printer

1. Power off the printer.
2. Pressing the "Select key", power the printer on.
3. Keep pressing it until the message, "Engine EDC Mode" is shown on the panel.
4. Follow the usage for a function you would like to use.
5. Turn the power off, after the test is complete.

Press: Menu # 1 9 3 4 OK Menu
Tech Mode / Tech Menu should now be shown on screen

If you aren't in KBII or a language mode or the printwheel is bad the P/W homing pawl is probably
broken, you need a tech.

DickyO

If you aren't in a language mode or KBII the printwheel homing pawl is probably broken. You need a tech.

DickyO

If tou aren't in KBII or a language mode the print wheel homing pawl is probably broken. You meed a tech.

DickyO

If you aren't in KBII or a language mode or P.S. pitch the printwheel homing pawl is probably broken. You need a tech.

If you are not in KBII or a language mode the printwheel homing pawl is probably broken. You need a tech.

DickyO

Resetting Samsung printer:

You need to press the following keys in quick succession - MENU # 1 9 3 4. Then you should see a message on your display saying 'TECH.' Then again select the MENU key followed by ENTER. The display will now show 'TECH MODE.' Then select the '<' key two times. Your operator panel should show 'NEW CARTRIDGE'. Then select ENTER. Now the panel will show [YES]. Select ENTER key again. You can exit from this mode by pressing MENU # 1 9 3 4 again one after another.

If you need more help come back.Post / thumbs / testimonial are welcome!

If you are not in KBII, proportional space or a language mode the print wheel homing pawl is broken, you need a tech.

DickyO

Set the camera's shooting mode to one of the two remote modes. Quick-response remote takes a picture as soon as you push the button on the remote. Delayed-response remote waits two seconds so you can hide the remote behind your back.