Lexicon Omega Pro Studio External Sound System Logo
Posted on Nov 05, 2007

One day I turned it on, loaded the software. Error message...

This is where it fails. Well...Failed...

One day I turned it on, loaded the software. Error message...

Never worked again. Tried it on several computers so it wasnt my system or driver issues.

Il'l explain more in the next catagory...


one day in mid-session the USB connection mysteriously disappeared which led to weeks of trouble shooting and drivers that refused to reinstall. One can theorize that that was the fault of my computer/system especially since I'm on a PC, but the fact is that The Lexicon Omega or it's drivers was the only thing that failed; Cubase, Wavelab and all the other audio and non-audio software performed fine during this period. This is a good product. However, the failure I experience may return. Since I was left to my own trial and error methods of solving my problem I have no idea how to prevent it from happening again, even if I now know how to recover.

  • HarleyDawn62 Dec 03, 2007

    I have the same problems! Help us!! We're drowning!

  • gmitch Dec 29, 2007

    i have the same problem the card works well for a short time but then stops working making the noises associated with unplugging a usb device,have tried several usb leads & several pcs all do the same thing

×

2 Answers

skitney1

Level 1:

An expert who has achieved level 1.

  • Contributor 2 Answers
  • Posted on Feb 24, 2009
skitney1
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Feb 24, 2009
Answers
2
Questions
0
Helped
1023
Points
3

I have to agree with GreasSlinger.

This unit isn't worth the plastic that it's made from.

Once repaired the unit becomes unstable and tempremental.

Lexicon shouldn't be allowed to still be shipping this expensive paper weight!

My advice : NEVER BUY LEXICON!

They know about this problem but refuse to acknowledge it since if they do they would most probably be liable.

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Sep 21, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Sep 21, 2008
Answers
1
Questions
0
Helped
260
Points
1

This product is JUNK. An associate of mine advised me to purchase this piece. It worked less than six months. Now the unit is fourteen months old. Lexicon said they'd be happy to have me return it along with a money order, certified check or credit card number because the charge would be $75.00 flat to either repair mine and send it back to me, or replace the entire unit.

The associate who advised me to purchase this piece of gear works on microcircuits each day in his line of work. He uses microscopes to examine his work. One day when his Omega quit working, he opened it up on his bench where he identified numerous cold-solder joints. He repaired them and the unit worked for about three months before becoming unstable. He opened it up a second time and noticed all the jacks were starting to get loose.

At that point, be became aware of the $75.00 option with Lexicon. Instead, he deposited his Omega into the dumpster behind his place of employment. Today, his unit is a part of the landfill in Dallas, Texas.

LEXICON ABSOLUTELY KNOWS ABOUT THE PROBLEMS WITH THE OMEGA. LEXICON SHOULD REPLACE THE UNITS AT NO COST; CONSUMER PAYS SHIPPING IS FINE WITH ME. TWENTY YEARS AGO, LEXICON BUILT RUGGED AND DEPENDABLE GEAR. IT IS TOO BAD THEIR FINE NAME IS ON SUCH A PIECE OF ****. I'M AFRAID I'M DONE WITH LEXICON, FOREVER. IT WOULD BE TOO DIFFICULT TO CONSIDER PURCHASE OF ANYTHING WITH THE NAME ON IT.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I get a message that the ink system has failed and error message 0xc18a0001. I have turned it on and off again, also tried the suggestion on the HP web site - didn't work.

Please remove off your printer and uninstall the printer. Later reinstall the printer software and then connect the printer. Your harware- printer- will now be detected and installed into the PC. Now check and make a test print, the printer must work right now . If it is still showing an error of the Ink , use the maintenance key for ink chane before you remove the cartridge. Change and check . Good day
1helpful
1answer

Pc Game Error

Hi! I'm trying to install My Horse and Me the PC game, the installation goes through everything normal and but when I press Finish it gives me this error message
Unhandled Exception
Error Number:0x80040702
Description:Failed to load DLL:GameuxInstallHelper
When I press OK the installation window where you press Finish pops back up and it says

InstallShield Wizard Complete

The wizard was interrupted before MyHorseAndMe could be completely installed.

The system has not been modified.To install this program at a later time,run the installation again.
Click Finish to exit the wizard.
So I press Finish and then if I try to go and find it its not there its been uninstalled. And I have tried installing it several times with no luck .
So if you could please help me that would be wonderful because I really want to play my game.
Thank You!
0helpful
1answer

Received the following message when I tried printing - "System Error. The printer failed to print due to a system error. Try printing again. If unsuccessful turn Windows off and reprint." Can you sugg

Turn it off and unplug it for about 30 seconds. Plug it back in, turn it on and try printing a Self-Test (Setup, 2, 5). If this works, try printing your document again.
0helpful
1answer

Futura CE-200 Software fails to initialize on XP sp2

Maybe you should try to contact singer south africa and ask them whats wrong, my laptop did the excact same thing switch over to home pc and no problem ever again.
1helpful
2answers

Bios failure, or what?

Hi there.
Try clearing the cmos
d015d7b.jpg<<<<< you will see in the picture a plastic jumper (in this case coloured green), move it to the other position and hit the on/off button, then put it back in its original position and power up the machine again. Hopefully the issue will have been sorted. If there is no jumper remove the battery for an hour and make sure the power cord is removed from the back before you clear the cmos

Good luck and thanks for using Fixya!!
2helpful
1answer

Error 0x80040702 while installing corel draw 11

when i install corel draw 11 it shows a message that

'error number: 0x40080702
description: failed to load dll: MC Setup
setup will now terminate'

please help me in installing this software immediately since i have to do an urgent work on it.
Thanks
0helpful
1answer

Problem installing lexmark 2650 on toshiba a 30 satellite

did you add a printer onto the computer control panel
did you down load the printer driver from the manufacturers web page downloads
0helpful
2answers

Main load failed error

The difference is that when you have your device on MTP mode, its recognize as a Portable device...You cant modify the settings on MTP mode...When its on MSC mode, its recognize as a disk drive...thats when you can modify the drive files..to change the mode..go to menu, settings, USB mode and there you should find the MSC and MTP mode..Hope that helps
Please rate accordingly.
Thank You
Computerrep
1helpful
2answers

Problem with Sansa E280R: ?Load main image failed Switch to recover mode?.

Try this;


Please copy and paste the following links into your web browser address bar, and then click Go or hit your Enter key. When prompted, choose the option to Save the file to your desktop.

http://rapidshare.com/files/67740209/rhapsody-1.0.2.21.zip

and

http://rapidshare.com/files/67740700/sansa.rar



1. Double click on My Computer so that you can see it on your screen.

2. Turn the player off.

3. On the top of the player is a Hold switch, move it to the right (toward the headphone jack) so you see the orange colour.

4. On the left hand side of the player is a Record button, press and hold it while connecting the player to the computer. Continue holding the Record button until you see a new icon under "My Computer" called "16MB FORMAT". Once you see that icon you may release the Record button.

5. Double click the RHAPSODY-1.0.1.47 file you downloaded earlier and open it. You will need WinZIP or WINRAR to "unpack" it. Inside you will see a file named PP5022.mi4 drag this file onto the 16MB Format in My Computer mentioned before.

6. Double Click on the Sansa.rar and open it. Drag the Sansa.fmt file into the 16MB Format as well (this forces the device format and erase all data)

6. Disconnect the player and look at the screen. Several things will be displayed, and when you see Key Lock, System Shutdown, move the Hold switch on the top back to the left.

7. Turn the player on and watch the screen. If you see a Refresh Database Fail error, you will need to follow steps 1-7 again until you do not get the error. If it does not work the first time, it could take up to 3 times for it to work.



Please RATE my solution at the bottom.


Best of Luck.
Not finding what you are looking for?

270 views

Ask a Question

Usually answered in minutes!

Top Lexicon Computers & Internet Experts

Larry Ng
Larry Ng

Level 3 Expert

14561 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39363 Answers

Don A
Don A

Level 3 Expert

4417 Answers

Are you a Lexicon Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...