My phone model Nortel T7316E '0" press shows restricted call how can remove this
SOURCE: Need to divert T7316E Nortel to mobile phone
I can help, but this is a free forum. Your installer is your best bet, but on a short notice, here's a manual for a CICS. Follow this link and grab it.
http://public.carl.airpost.net/
Denied in Admin means it's restricted. Remember I noted that there are programming and Class of Service issues. If you can get into Administrative programming, you can follow the Terminals and Sets link to find Redirection. IIRC it has to be allowed per set. Let me know when you get this, as I won't leave the manual online for very long.
Carl
SOURCE: MY NORTEL T7316E, THE OPERATOR
Try FEAT #85. Somehow I'll bet someone was playing with the buttons and dialed FEAT 85. It needs the # to cancel.
SOURCE: How do i set up a voice mail greeting on my nortel phone?
bodell,
The short version of getting to your greeting is:
Feature 981 or open voicemail key
your password
"8"for admin
"2" for greetings
"1" for record
"1" for primary greeting
"'1" to record your greeting
at the tone record your greeting
"#" to end recording
after you record press 1 to listen 2 to retry or # to accept
press "rls" key when finished
hope that helped.
SOURCE: T7316e Nortel Meridian Norstar Telephone MANUAL
Not too sure what type of manual you are looking for, but here is a useful link to have for a Norstar system information.
http://www.alphatelecom.ca/meridian_norstar_manuals.htm
SOURCE: I have Nortel T7316e phone
Programming is done on 7310, 7324 and 7316 type sets.Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change to handsfree.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the show key (top right arrow) .
The display say foward no answer.
press the next key 3 times (bottom right arrow)..
The display should say handsfree. Press the show key.(top right arrow) change from none to auto
Press the release key when finished
Follow this instructions to reset the Administrator password.
Press Feature 985 and dial 9 even though it is not listed as an option.
The display will show Pswd: dial 73738767793
The display will show Reset pswd? Press YES.
You should now be able to enter the default password.
2 digit extensions use 120000
3 digit extensions use 1020000
4 digit extensions use 10020000
505 views
Usually answered in minutes!
×