Reset hp 7410 - HP Officejet 4355 All-In-One InkJet Printer

Try :

HP OfficeJet 7410

1. Perform a partial reset on the printer. To do this first remove the power supply from the back of the printer. With the power off press and hold the # and 3 keys.
2. Plug the power back into the printer, keep holding the # and 3 keys till you see " Partial Reset " displayed on the printer screen.
3. If that does not work, do the same but press and hold the # and 6 keys

Re-initialize the HP all-in-one

Force the HP all-in-one to reinitialize by following the steps below:

1. Turn the unit off by pressing the ON button.

2. Disconnect the power cord.

3. Wait five seconds, then reconnect the power cord.

4. but before plugging the unit back in, press and hold the # and 6 keys on the HP all-in-one numeric keypad. Continue to hold these keys down for a few seconds after plugging the unit back in to reset it. Once the all-in-one re-establishes communication with the computer, reset the language and country.

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Basically removing power is all you have to do to reset the printer. However, if you need any other information, here is the link to HP for your printer: http://h10025.www1.hp.com/ewfrf/wc/product?lc=en&dlc=en&cc=us&lang=en&product=391194&

Hi,

Please try resetting the printer, Click here to see the reset instruction

Regards
Riztech

the hp support wesite should have it---if not, try driverguide.com

Step two: Perform a semi-full reset CAUTION: Performing a semi-full reset deletes any saved phone numbers on the product.

1. Disconnect the power cord from the product.
2. Press and hold # and 6 while reconnecting the power cord to the product, and then release both buttons.

and it will reset the printer

Perform a power reset

1. Press the On button to turn off the HP All-in-One.
2. Unplug the power cord from the back of the HP All-in-One.
3. Unplug the power adapter from the wall outlet and wait for 30 seconds.
4. Plug the power adapter back into the wall outlet.
5. Plug the power cord to the back of the HP All-in-One.
6. Press the On button to turn on the HP All-in-One.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Well it just needs some good old TLC it just may need to be repaired if the reset did not work if its under warrenty hp will replace it give them a call you be glad you did.

Rulds2008

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

if the circuit breaker is not tripped on your surrge protector...unplug the power cord from the back of the printer...(not the wall plug, but where the cord goes into the printer) for at least 30 secs...that should reset your power supply

http://multifunction.free-driver-download.com/33551/HP-Officejet-7410-7410xi-7413-All-in-One-Basic-Software-Driver-4.7.0-Windows-2000-XP.html

try this web page, copy and paste the link into address bar. search facilty at top

http://h10061.www1.hp.com/ccsearch/search?pname=HP+Officejet+7410+All-in-One&pid=391195&productBigSeriesOid=391192&spid=391194&opname=HP+Officejet+7410+All-in-One&contextual_lname=&pname_desc=HP+Officejet+7410+All-in-One+Printer%2FFax%2FScanner%2FCopier&ptype=consumer&stype=pn&spname=HP+Officejet+7410+All-in-One&temp_hql=s-001%2Cs-002%2Cs-004%2Cs-003%2Cs-005%2Cs-006%2Cs-017%2Cz-001%2Cc-002%2Cc-001&ctry=us&lc=en&dlc=en&mode=lz&tmv=-1&method=prodFinder&qry=blue+vertical+line&Submit.x=0&Submit.y=0&Submit=go