At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hello,
On these PowerMac G4 desktops, the powerbutton works when you press hard and long on it.
If this continue even doing so, I would recommend to take the Mac for repair.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
JBLhttps://ca.jbl.com > warranty
Unless a different warranty period is stated in the Warranty Card provided with your JBL product, JBL warrants for a period of 1 year (5 years for any non- ...
JBL Charge 4 TroubleshootingiFixithttps://www.ifixit.com > Wiki > JBL_Charge_4_Troub...Make sure the charging light on the base of the device is blinking. If it is fully charged and still not turning on, the power button may be worn out or broken. The Speaker Will Not Power... · The Device Won't Connect to.....
This projector as with most high power projectors will have a cool down period for the lamp once the power button is pushed from on to off. For this model, the cool down period is 120 seconds after which the unit will fully power down. You can override this cool down period by pushing and holding the power button for 1 seconds. If you use this procedure though, you should not power up the projector again for at least 60 seconds to allow the internal temperatures to stabilize.
Check if there is an issue with the Power button. Verify if the button works properly. If yes, replace with a new power button. If the tablet is under warranty period, replace it with a new one.
Sorry,there are no resetting button,unplugging,waiting for a period of times,ruplugging tv it back that is ur reset back to the factory setting.Tv have the same problems,not working.The power supply board have problems,it dying.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
Probably not possible. But let's try few things to make the power button work... Try the power button after doing "each" of the following...
- Remove the battery and then re-insert it. - open the body/cover and then clean the inside part.
If the above method doesn't work, then you have to visit the store from where you purchased it... if it is in warranty period, then get it repaired or replaced.
I hope you found the above info useful. Please rate and comment on the progress.
Replace the batteries for starts. If the remote was having any buttons pressed for a long period of time, the power capacity of those batteries is quite diminished...accordianman
×